Epson PP-100N - Discproducer - DVD Duplicator x2 Скачать руководство пользователя страница 8

Страница: 8 / 174

Cautions for the power source

WARNING

Do not connect or disconnect the power plug with wet hands.

This may result in electric shock.

Use only the type of power source indicated on the product’s label.

Also, do not plug the power cord into an outlet with many other cords

connected to it.

Using an out-of-spec power source may result in electric shock or fire.

Do not use a damaged power cord.

This may result in electric shock or fire.

If the power cord is damaged, consult your dealer for repairs.

Observe the following when handling the power cord.

•

Do not modify the power cord

•

Do not place heavy objects on the power cord

•

Do not bend, twist or pull the power cord by force

•

Do not wire heating appliances nearby

Be careful when handling the power plug.

Mishandling may result in fire.

•

Do not leave plugged into a power source having foreign matter such as

dust

•

Firmly insert the prongs of the power plug all the way

When you disconnect the power plug from the outlet, be sure to turn off the

power and hold the plug as you pull.

If you stretch the power cord, it may become damaged, which could result in

electric shock or fire.

Be sure your AC power cord meets the relevant local safety standard. Also, do

not use the power cord included with this product with any other devices.

This may result in electric shock or fire.

For safety reasons, be sure to ground the power cord.

The power code included with the product is a 3-pin cable with a power

system grounding (PE) terminal, so connect it to an outlet with a grounding

electrode and ground it securely.

CAUTION

Regularly disconnect the power plug from the outlet and clean the base of the

prongs and between the prongs.

If you leave the power plug connected to an outlet for a long time, the base

of the power plug prongs may become dusty, which may result in short circuit

and fire.

For safety, be sure to disconnect the power plug from the outlet when you will

not be using the product for a long time.

Содержание PP-100N - Discproducer - DVD Duplicator x2















































































































































































Результаты поиска

Содержание PP-100N - Discproducer - DVD Duplicator x2

Отзывы:

Похожие инструкции для PP-100N - Discproducer - DVD Duplicator x2

Бренды по названию

Популярные бренды

Epson PP-100N - Discproducer - DVD Duplicator x2, Руководство пользователя

Результаты поиска

Содержание PP-100N - Discproducer - DVD Duplicator x2

Отзывы:

Похожие инструкции для PP-100N - Discproducer - DVD Duplicator x2

Бренды по названию

Популярные бренды