manualshive.com logo in svg

Epson Equity 386SX PLUS, Руководство пользователя, Страница: 267 / 284

Поделиться
Скачать
Epson Equity 386SX PLUS Скачать руководство пользователя страница 267

Memory on card

The additional memory on an option card installed in the
computer.

MGA

Multi-graphics Adapter. A type of display adapter card that can
display monochrome text and color graphics on the screen.

Microprocessor

A small version of a CPU contained on one semiconductor
chip.

Modem

A device that allows a computer to transmit signals over
telephone lines so it can send and receive data. Modem stands
for MOdulator/DEModulator.

Monitor

The piece of hardware that contains the screen and displays

information.

Monochrome monitor

A monitor that displays in only one color, such as green or
amber, as opposed to a color monitor which can display in
several colors.

Mouse

A hand-held pointing device with one or more buttons. When
you slide the mouse over a flat surface in a certain direction, the
cursor moves in the same direction on the screen.

G l o s s a r y   1 3

Содержание Equity 386SX PLUS





























































































































































































































































































Отзывы:

Нет отзывов