Epson Equity 386SX PLUS, Руководство пользователя

Страница: 216 / 284

You can select the individual tests from the following menu.
DISKETTE DRIVE(S) AND CONTROLLER CHECK MENU
1 - Sequential seek check
2 - Random seek check
3 - Write, read check
4 - Disk change check
5 - Run all above checks
0 - Exit
Before it performs any checks, the program determines the
number of diskette drives installed in your computer. If you
have more than one drive, you see this prompt each time
you
select a test:
Enter drive number ?
(1/2)
Select 1 (for drive A) or 2 (for drive B). If any errors occur,
record the error code and message and contact your dealer.
Always have the diskette drive serviced by your dealer or service
center.
When you finish testing the device and return to the menu,
select 0 to exit.
Sequential Seek Check
This test checks the ability of the read/write heads to locate any
part of the diskette. This action by a read/write head is called a
seek. During this test, each head seeks sequentially from the
innermost track to the outermost track. The innermost track is
track 79 for 1.44MB, 1.2MB, and 720KB diskettes and track 39
for 360KB diskettes.
C-24
Performing System Diagnostics