58
EN
Potential-free (volt-free) contact
Synchronisation options and settings for the po-
tential-free contact output
Service area icons
Service / maintenance intervals
Choose to set the service/maintenance intervals
Temperature offset
Setting for displayed „is now“ temperature offset
+2 / -2 K in relation to the real value.
Firmware Update
Firmware update possibility for display panel, re-
lay box or colour light module
Reset
Resets to factory defaults. For one cabin or for all
settings (by mult-cabin control).
Operation type
Selection betwee private or commercial use
Hysteresis
Adjustment of the switching hysteresis
Fan operation time
Setting for the fan operation time during cabin
dry mode (0-60 minutes)
Fan
Settings for the fan output
.
Descaling
Manual descaling start.
Bench heating
Setting for hysteresis 1-5 K, temperature 20-40°
Floor heating
Setting for hysteresis 1-5 K, temperature 20-40°
Drain water tank
Allows to manually drain the water tank
Essence dosing
Setting for injection time 1-15 sec and dosing in-
terval 1-30 min. Dosing pump selection.
