23
EN
4x
4x
4x
4x
4x
127
35
188
140
alle Maße in mm
200
Pic. 8
Wall aperture:
Width 188 mm
Height 127 mm
Depth min. 35 mm
Bottom housing installation
Display panel installation
Pic. 7
cable feed opening
Notice:
Pay attention to the correct ori-
entation of the housing base, the
opening for connecting cable
should be at the bottom side as
shown on fig. 7
First install the housing base into the cabin wall (see fig. 7 - 8):
1. Loosen 4 screws holding mounting brackets in the base
2. Pull the connection cable through the opening in the housing base.
3. Insert the housing base into the wall cut-out.
4. Adjust the metal brackets to the wall panelling thickness.
5. Tighten the screws - the brackets will be pulled to the wall panelling from inside and will
fasten the housing base in the opening.
Installation depth
min. 35 mm
