54
EN
Display lock / Child protection
To protect the unit against an unauthorised access, you can lock it completely with your own PIN
code (4 to 8 digits).
To lock the unit, touch the
icon and briefly touch it again. A dialog is displayed showing “----”
and a numerical keypad. Fill the four blank digits with your own PIN code. Confirm the entry.
The main screen is displayed and the unit is locked. Settings cannot be changed.
For safety reasons, you can still turn off the heating and turn on the cabin light although the dis-
play is locked. You will be requested to enter the PIN code if you try to do something else.
To unlock the unit, touch any icon (e.g. On/Off) to launch the PIN code request dialog. Enter the
correct PIN code. The unit will unlock.
Important notice for display lock
Display panel can be completely or partially locked with your own PIN code via the extended set-
tings. During the active lock you can only switch off the heating and switch the lighting. Holiday
home mode allows the limited number of basic functions.
!
ATTENTION
Make sure to remember the selected pin code! Please bear in mind that in the case this
code is lost you
will not
be able to operate the control unit. In the case the pin code is
no longer available and cannot be restored please contact your local EOS dealer or EOS
service.
Auto-Stop (heating time)
Use this function to set your preferred heating time of the cabin.
Private users can set this time to max. 6 hours. Commercial users can set the time up to unlimited.
The “unlimited” setting means manual mode, no automatic stop. The heating time limitation is
based on the operation type (private or commercial use) selected during setup.
Touch the
icon twice and set the heating time (hours and minutes) in the sub-menu. Upon
confirming your entry, the display returns to the previous menu.
When you turn on the heating, the remaining runtime shows as a countdown timer in the bottom
section. This tells you at a glance the remaining heating time.
The heating time may be set at steps of +/- 1 minute. The minimal heating time is 15 Minutes. No-
tice that after the main heating the ventilation fan will switch on (0-30 min.) to dry the cabin unless
it has been disabled during setup.
Operation data
Use this function as query to check basic operation data and details.
