Entec ETMFC610 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 372

Entec ETMFC610 Скачать руководство пользователя страница 57

Multi-Function Control ETMFC610

http://www.entecene.co.kr

47

EN

HANCED

TEC

HNOLOGY

SEF ENABLED

SEF  ENABLED  LED  is  ON  and  OFF  by  pressing  “SEF  ENABLED”  push-button.  When  the
“PROTECTION  ENABLED”,  “GROUND  ENABLED”  and  “SEF  ENABLED”  LEDs  are  both
ON,  Sensitive  earth  fault  indication(in  case  of  Fault  Indication  type)  and  SEF  overcurrent
protection  elements (in  case  of Protection type)  operate.  However,  even  if any  of  the three  LED
lamps is OFF, sensitive earth fault elements do not operate.
When “SEF ENABLED” is ON, “GROUND ENABLED” becomes ON. Also, when “GROUND
ENABLED” is OFF, “SEF ENABLED” becomes OFF at the same time.

LOOP CONTROL ENABLED

When “LOOP CONTROL ENABLED” LED is ON, loop control function is enabled. However, the
loop control function operates only in Fault Indication type.

CONTROL LOCKED

When the “CONTROL LOCKED” LED is on, all the functions in the operation section and Local
control section are locked. These can be unlocked by pressing the “CONTROL LOCKED” push-
button at the front panel.

NOTE :

Even though Control Locked function is locked, OPEN, Battery Load Test, Trip Test,

Lamp Test and menu control section can be normally operated.

REMOTE ENABLED

When the “REMOTE ENABLED” LED is ON, all remote control functions (e.g. SCADA system)
are enabled. This can be disabled by pressing the “REMOTE ENABLED” push-button at the front
panel. SCADA control refers to supported communications protocol such as DNP3.0, MODBUS,
IEC60870-5-101, IEC60870-5-104 and IEC61850, etc.

NOTE :

When the “REMOTE ENABLED" LED is ON, depending on user’s request and

option, Push-Button controls on the front panel can be blocked except for

“

GROUP SELECT” push-button, LAMP TEST and MENU Control Section.

«
...
55
56
57
58
59
...
»

Содержание ETMFC610





















































































































































































































































































































































































Отзывы:

Нет отзывов