Eliet Turfaway 600 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 88

background image

25

English

8. Dealer’s responsibilities

8.1. Unpacking the machine

• ELIET machines are packaged in accordance with standard rules for proper transportation.

For your information:

deliveries are always ex works. Consequently, ELIET can-

not be held liable for any damage that occurs during transport.

• If the packaging is damaged upon receipt of the goods, check the state of the machine to en-

sure it is not damaged. Report any irregularities on the delivery slip before signing for receipt.

• In the event of damage to the machine, a complaint to the shipping company must be submit-

ted immediately after delivery.

• Before opening the packaging, check that the information on the label affixed to the box cor-

responds to what is stated on the delivery slip and to what was ordered.

• In the event of discrepancy, contact the ELIET representative immediately to report this.
• After checking the packaging, the machine should be unpacked.
• The machine is attached to a wooden pallet. It is enclosed with a carton sleeve to protect the

contours of the machine. An opening is provided on each long side so that operators in the
logistics process can assess the content and weight distribution before lifting and moving the
package. The carton sleeve is wrapped with transparent film to protect the machine.

• Start by removing the transparent film. Via

the openings in the sides it is already possible
to conduct a visual check of the state of the
machine.

• In order to easily remove the carton sleeve,

cut the box on each side just above the pallet.
(see illustration)

• Remove the sleeve sideways at an angle, to

reveal the machine.

«
...
23
24
25
26
27
...
»

Содержание Turfaway 600

























































































Отзывы:

Нет отзывов

Похожие инструкции для Turfaway 600

Бренд: Landoll Страницы: 34

Бренд: Raith Страницы: 26

Бренд: Kane Страницы: 16

Бренд: Eagle Eye Страницы: 21

Бренд: Labomed Страницы: 67

Бренд: G-Systems Страницы: 60

Бренд: G&G Страницы: 2

Бренд: Lars Thrane Страницы: 50

Бренд: Rain-Flo Irrigation Страницы: 16

Бренд: Hands Free Farm Страницы: 24

Бренд: U-Line Страницы: 6

Aqua Timer 3000

Бренд: Melnor Страницы: 6

Бренд: Grundig Страницы: 19

Бренд: Megger Страницы: 12

Бренд: Toparc Страницы: 32

Бренд: Vision & Control Страницы: 32

Бренд: Neilsen Страницы: 8

LIGHT LINEAR PT 1

Бренд: LIGMAN Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды