72
English
• If all options to adjust at the levers have been exhausted, you can then use the options for
adjusting on the cable sleeves near the tensioning rollers: To do so, unscrew the counter
nut (anti-clockwise) (M6 wrench size 10). Then unscrew the cable sleeve (anti-clockwise) (M5
wrench size 7). After each rotation in unscrewing the cable sleeve you must test the tension on
the belt. Repeat this until reaching the correct tension. Then firmly re-tighten the counter nuts
(clockwise).
• Once the tension is regulated, carefully replace the guard. Firmly re-tighten the six M6 bolts
(ratchet wrench size 10).
11.5.4. Checking and sharpening blade
It is important that you work with a sharp blade and one that is in good condition, in order to
work properly and safely. When checking the blade pay attention to 3 things:
a. Blade distortion
b. Broken blade
c. Sharpness of the cutting edge
a. Blade distortion:
• The blade has one horizontal part and 3 vertical parts.
• Check that the horizontal part is not distorted.
• Check that the angle between the horizontal part and the vertical part is still 90°. A side im-
pact can stop the blade from being perpendicular, meaning that the cutting edge is no longer
horizontal.
• Replace the blade in the event of defects.
b. Broken blade
• The vertical parts of the blade are welded to the horizontal part. Wear, fatigue or impact can
cause the blade to fracture in line with the weld.
• Under no circumstances should the blade be used in this condition. There is a high risk that
part of a blade will break off and injure the operator.
• If this is noticed the blade must be taken to an authorised ELIET dealer for replacement or
repair.
c. Sharpness of the cutting edge
• The blades will gradually lose their sharp edge as they cut the ground. Once they are blunt
the sharp edge of the blades will become a wide edge which increases the resistance when
cutting.
• In order to ensure the machine works effectively, the edge of the blade must be regularly
checked and sharpened.
Содержание Turfaway 600
Страница 1: ...Turfaway 600 M A N U A L ...
Страница 11: ...11 English 1 Blade guide 2 Blade carriage 3 Connecting rod 4 Gear box 1 2 4 3 ...
Страница 82: ...82 English ...
Страница 88: ...88 English BZ 201 440 003 ...