Eliet Turfaway 600, Руководство пользователя

Страница: 27 / 88

27
English
8.2. Other responsibilities
• The dealer is responsible for preparing the machine for use, before supplying it to the end user.
• The fuel tank must be filled with petrol UK (gas in USA) (read § 9.3; page 38)
• The dealer checks whether there is oil in the engine and tops this up if necessary.
(read § 11.4.3; page 64)
• The dealer checks whether the machine is filled up with hydraulic oil. (read § 11.7.1; page 76)
• Every ELIET dealer warrants the long life span of ELIET machines. He will fully lubricate the
machine. All hinging and rubbing surfaces will be greased. In particular the guide on the blade
carriage will be lubricated. (read § 11.5.1; page 66)
For your information: check the list for the correct lubricant (read § 11.3; page
62)
• The dealer ensures that the engine speed is set to 3,200 rpm.
• The dealer must make a final test drive and check that all devices are working properly.
• The dealer must check that all safety features work perfectly.
• The dealer must set the Cruise Control of the joystick operation. (read § 9.2.5; page 36)
• The dealer shall install any additional options on the machine.
Warning: As an ELIET dealer you must familiarize your customers with the
operation of the machine and also point out the possible dangers while using
it. You are expected to carefully go over the maintenance points of the machine
together with the new owner. Repeat these instructions until the new owner has
fully understood everything.
Important information for the new owner at the time of delivery:
• The dealer explains how to adjust the depth and what the optimum work depth is.
• The dealer must familiarise the new owner with the machine’s operation.
• The dealer gives practical tips on working efficiently with the machine.
• They must also inform the new owner of potential hazards.
• The dealer will draw attention to the fact that steering the machine in reverse is opposite to
when driving forwards. This takes some practice before you are used to it. With this we wish to
prevent danger occurring due to ignorance.
• The dealer will draw the new owner's attention to the fact that he should check the tension of
all bolts after the first 5 hours of operation.
• The dealer must insist that the machine should be returned for its first service after 10 hours of
operation (drive belt tightening and first oil change are required).