Eliet Turfaway 600 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 88

background image

50

English

Caution:

the weight of the machine alone (without the option extra front

weight) is 195 kg (430 lbs). Make sure that the hoist is appropriate for lifting this
weight. You must only use hoisting elements (chains, cables, hoisting belts, etc.)
that have been recently certified.

• The position of the hoisting eye should be chosen so that the machine is balanced when lifted.

However, this does not take into account an optional front weight that may be attached.

Attention:

before lifting, always remove the front weight. (read § 9.2.4; page 35)

Caution:

keep bystanders at a safe distance (10 m - 30ft).

• Choose a slow lifting speed to minimise the impact of inertia.
• Do not lift the machine any higher than necessary.

Caution:

do not walk/stand beneath the load.

• Do not leave the machine hanging in the air any longer than necessary.
• The machine should only be placed on a surface that can support the weight of the machine.

9.10. Tightening the tracks

Tracks typically stretch over the course of several working hours.
This can cause them to come loose, leading to the potential risk of them falling off. You must re-
tighten the track as necessary.

• To do so, place the machine on a flat surface.
• The track system features tightening rods on the back rollers.

«
...
48
49
50
51
52
...
»

Содержание Turfaway 600

























































































Отзывы:

Нет отзывов

Похожие инструкции для Turfaway 600

Бренд: Ecco Страницы: 9

Бренд: Rain-Flo Irrigation Страницы: 20

Attest Auto-reader 390

Бренд: 3M Страницы: 2

Бренд: 3M Страницы: 2

Бренд: 3M Страницы: 2

PELTOR WS LiteCom Plus

Бренд: 3M Страницы: 7

Steri-Vac GS Series

Бренд: 3M Страницы: 52

Бренд: DB Industries Страницы: 60

Бренд: Salsbury Industries Страницы: 4

Бренд: Oceaneering Страницы: 27

Бренд: Bartscher Страницы: 61

Monolith NT.115

Бренд: Nano Temper Страницы: 24

Бренд: Stanton Страницы: 13

Бренд: Laserworld Страницы: 34

Бренд: Sentinel Страницы: 16

ZiXpress 64 DX system

Бренд: ZINEXTS Страницы: 34

Бренд: Lakeland Страницы: 16

Бренд: Event Lighting Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды