Eliet Turfaway 600, Руководство пользователя

Страница: 44 / 88

44
English
A good gardener works efficiently and according to a well defined plan. He shall define the inten-
ded route used to cut away the turf beforehand. In doing so he keeps an optimum overview of his
work and discovers problems or difficult elements beforehand and can consider how to approach
them. This helps to prevent accidents or incorrect use of the machine.
Tip when determining the course:
When cutting turf in the zone where it is to be removed this shall always be done in parallel
strips. In particular, in the turns at the end of each track, a number of actions must be carried
out: the blade is lifted from the ground, turn, the blade is returned to the ground. To achieve this
faster and more easily it is handy to first cut out one to two perpendicular strips in the turning
zones at the end of the tracks and to immediately remove these loosened turfs entirely.
In doing so two deeper zones are created at the extremities of the work zone. After turning it will
be easier to get the blade to work depth when beginning the new strip. This allows you to work
faster.
Before working with the machine the following steps will be required:
• Set the correct work depth beforehand. (read § 9.2.2; page 31)
• Drive the machine to the start of the marked course.
• Set the engine to full throttle (the revolution will be 3,200 RPM).
• Put the joystick lever in its neutral position.
Caution: keep feet at a safe distance from the blade, which will start moving
upon the next action.