Eliet Turfaway 600, Руководство пользователя

Страница: 20 / 88

20
English
7.3.2. Careful and proper use
• Think about every action you perform with the machine. Do not be tempted to become inatten-
tive. Never act impulsively or on reflex.
• Despite the extensive safety features, do not seek out hazardous situations.
• This machine is used to cut turf from an ornamental lawn. This assumes that the lawn has been
laid out and the top layer of the surface contains no obstacles. The maximum work depth is
60 mm (2 1/3”) in the ground. The machine must only be used for this purpose.
• Turfs shall only be cut in a forward travelling direction.
• The machine must never be used as a means of transport for people or heavy loads. Nor must
it be used to pull or drag objects.
• The machine must only be used on moist lawn ground. A dehydrated lawn ground must be
sprinkled beforehand.
• The machine must not be used on frozen ground.
• The machine is intended for outdoor use. It must not be used in a closed or poorly ventilated
area. There is a risk of intoxication due to exhaust fumes.
• The machine must not be used on slopes of more than: 30% in the travelling direction, 30%
diagonal to the travelling direction.
• When cutting the turf loose, a blade cuts through the upper surfaces of the lawn. Before star-
ting work, the lawn must be thoroughly inspected for foreign objects and obstacles (sprinkler
nozzles, pit covers, edging and stepping stones, pegs, rocks, etc.). These must be removed.
Consult the owner of the terrain about objects that may be in the ground (electric cables, fuel
or gas pipes, control cables, zone marking for robot mower, rocks, water pipes, irrigation sy-
stems, drainpipes, foundations, war ammunition, tree roots, etc.). These zones should be clearly
marked and protected to prevent them from being accessed during the work.
For your information: ELIET declines all liability for damage resulting from
improper blade settings or damage to underground objects.
• All animals must be removed from the work zone.
• All ropes and straps used to attach the machine during transport must be completely removed
before driving or operating the machine.
• Never work when light intensity is below 500 Lux.
• As soon as the machine leaves the lawn the blade must be raised from the soil and deactivated.
• During transport the blade must also be switched off.
• Use the machine in a manner that respects environmental regulations:
• Avoid running the machine without actively using it.
• Avoid spilling petrol UK (gas in USA) while refuelling.
• Service the engine regularly in order to maintain optimum combustion.