Eliet Turfaway 600 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 88

background image

42

English

• Pull the joystick backwards and to the left, and the machine will make a right bend in a back-

wards driving direction.

• Pull the joystick backwards and to the right, and the machine will make a left bend in a back-

wards driving direction.

• Those with no experience in driving the machine must first spend time becoming familiar

with the machine by carrying out manoeuvres on open terrain with a hard surface, without
obstacles.

• The Cruise Control can be set in such a way that the joystick remains in the position pressed.

This allows the machine to continue driving at a fixed speed. However, when driving on a
course where obstacles are encountered, keep the hand on the joystick, allowing immediate
adjustment of the speed or driving direction.

Caution:

on a course with obstacles the driving speed must always be at a

moderate pace.

In the event of potentially losing control, do not hesitate to immediately drop the operating lever
on the right-hand side so that the drive is switched off and the machine immediately comes to a
standstill.

Caution:

as soon as the machine reaches a standstill, the joystick must first be

returned to the central position. This prevents the machine from speeding off
the moment the operating lever for the track drive is pressed.

Caution:

when driving forwards up or down a slope the blade may touch the

ground in the kink in the valley. Watch out not to lose control over the drive.
Always moderate your speed.

Warning:

when loading the machine with the aid of loading ramps, always check

that the loading ramps are firmly fixed to the vehicle. Indeed, the traction force
of the tracks can make the ramp slide off, causing this to come loose from the
vehicle, making the machine tip and fall.

The operator could end up under the machine, causing serious injury or death. Care and atten-
tion is required.
When riding up a slope it is necessary to pay attention when the machine reaches the kink (top)
in the slope. When reaching this point with the machine, it can suddenly tip forwards or back-
wards. Be prepared for this in order to avoid losing control. Always slow down when approaching
the top or valley of the slope.

«
...
40
41
42
43
44
...
»

Содержание Turfaway 600

























































































Отзывы:

Нет отзывов

Похожие инструкции для Turfaway 600

Бренд: Ecco Страницы: 4

Бренд: 3M Страницы: 28

Бренд: Jacobsen Страницы: 6

Бренд: ICELED Страницы: 4

Бренд: Gardena Страницы: 19

Бренд: JBL Страницы: 38

Бренд: JBSYSTEMS Light Страницы: 32

Бренд: A&D Страницы: 29

Бренд: Lalizas Страницы: 12

Бренд: Ocean Signal Страницы: 2

ARCHISHAPE 2.0 Linear

Бренд: Osram Страницы: 7

Бренд: Wiedenmann Страницы: 41

electronic music instrument

Бренд: Quintet Страницы: 35

Бренд: Testboy Страницы: 16

Бренд: Salamander Designs Страницы: 4

Бренд: Facom Страницы: 2

Бренд: NICOR Страницы: 2

Sonorex Super RK 31

Бренд: BANDELIN Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды