Eliet Turfaway 600 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 88

background image

71

English

For your information:

The above description is for indication purposes. You

must also read the manual provided by the engine manufacturer.

11.5.3. Checking and adjusting the belt tension

The Turfaway has three belts:
• Belt drive for blade: two drive belts BA 521 711 681
• Belt drive for hydrostatic pump: one drive belt BA 521 708 381

Caution:

turn the engine off before checking or adjusting the drive belts. Let

these cool off long enough to avoid burning yourself on the exhaust.

• Both belt drives are protected by the belt guard. This guard is attached with six M6 fixing bolts.

Remove these bolts (by turning anti-clockwise) with a size 10 ratchet wrench.

• Every belt transmission is fitted with a coupling, using a tensioning roller.
• Check the tension on the belt by activating the respective tensioning roller.
• To do so, activate the respective lever on the handle. Ask a colleague to help by holding the

lever in this position while checking the tension. Hold the lever right up against the handle.

• If the tensioning roller is tense check the tension on the opposite side of the belt. Press the belt

with a force of 7 kg (15 lbs) about halfway between the two belt discs. With this pressure the
belt will depress by 1 cm (1/2”). If it depresses more, the belt must be tightened more.

• There are two possibilities to tighten the belt at the end sleeves of the cable guides: One in line

with the tensioning roller and another in line with the handle. Start by choosing one of these.

• For the adjustment on the lever: unscrew the counter nut (anti-clockwise) (M8 wrench size 13

to hydrostatic disconnection; M6 wrench size 10 for blade disconnection). Then unscrew the
cable sleeve (anti-clockwise) (M7 wrench size 12 for hydrostatic disconnection; M5 wrench size
7 for blade disconnection). After each rotation in unscrewing the cable sleeve you must test the
tension on the belt. Repeat this until reaching the correct tension.

• Then re-tighten the counter nuts on the cable sleeves (clockwise) (M8 wrench size 13 for

hydrostatic disconnection; M6 wrench size 10 for blade disconnection) in order to secure the
setting.

«
...
69
70
71
72
73
...
»

Содержание Turfaway 600

























































































Отзывы:

Нет отзывов

Похожие инструкции для Turfaway 600

Бренд: Landoll Страницы: 71

Бренд: Land Pride Страницы: 36

Skid Steer Rakes SR2672

Бренд: Land Pride Страницы: 2

Бренд: Land Pride Страницы: 2

Disc Harrows DH3510

Бренд: Land Pride Страницы: 2

Бренд: Land Pride Страницы: 4

Бренд: Land Pride Страницы: 4

Straw Crimper CR2572

Бренд: Land Pride Страницы: 16

Бренд: MacDon Страницы: 238

Бренд: Tandem Страницы: 7

AutoMate 2500 series

Бренд: Beckman Coulter Страницы: 50

Бренд: Landoll Страницы: 64

Бренд: Eterna Страницы: 2

Бренд: Stagg Страницы: 13

MODMASTER MULTI-FABRIC SOFTBOX

Бренд: Savage Страницы: 2

i7300 ReverbMaster

Бренд: Phonic Страницы: 37

EK 533 plus 2.0

Бренд: Langmatz Страницы: 60

Бренд: Vision & Control Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды