Eliet Turfaway 600 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 88

background image

15

English

1.

This sticker can be found on the dashboard: Its aim is to draw
attention to the number of risks connected with operating the
machine
The risks are then displayed as pictograms:

• This pictogram shows an acute risk of injury to the feet and lower

limbs. It is important to take the necessary precautions to prevent
this. Always wear sturdy footwear, preferably with steel caps and
clothes that cover the lower limbs.

• This pictogram shows a risk of projection. Elements can be pro-

jected from the ground due to the moving blade. Such projections
can cause sensory injury. It is therefore important to wear the
necessary personal protection equipment and keep bystanders at
a distance.

• This pictogram is also displayed on the dashboard. It reminds ope-

rators of their responsibility to keep bystanders at a safe distance
(10 m - 30ft) from the machine. Three "Do not" pictograms are
also displayed on the dashboard:

• This pictogram commands the user to read the manual before

using the machine.

• This pictogram orders commands the user to wear safety goggles

and ear protection.

• This pictogram commands the user to wear gloves.

This sticker will be replaced in the event of damage. Order code:
BQ 501 410 080

2.

The blade cover is also an operating element to take the blade to

its work depth. The contrasting markings on this panel are there
to warn the user that it is a danger zone. The stated pictograms
indicated the specific dangers:

• There is a moving blade under this cover. This pictogram warns of

the risk of foot injuries.

• There is a also a risk of projectiles from the moving blade. This

pictogram warns of this risk.

• Given the dangers it is advised to keep bystanders at a safe

distance. This pictogram helps the user to remember not to let
bystanders within a radius of 10 m (30ft) around the machine.
This sticker will be replaced in the event of damage. Order code:
BQ 501 410 110

3.

There is a relief image on the exhaust guard indicating that this

surface can get hot. Particularly during and after operation/driving
the machine there is a risk of burns.

«
...
13
14
15
16
17
...
»

Содержание Turfaway 600

























































































Отзывы:

Нет отзывов

Похожие инструкции для Turfaway 600

Бренд: MacDon Страницы: 272

Бренд: MacDon Страницы: 70

Бренд: IBEX Страницы: 10

Бренд: Daktronics Страницы: 30

Бренд: DAKOTA ULTRASONICS Страницы: 28

Бренд: Echo Страницы: 6

Pro Attachment Series

Бренд: Echo Страницы: 28

Бренд: Echo Страницы: 2

Pro Vantage 12+ Series

Бренд: Ecco Страницы: 6

Бренд: Eaton Страницы: 16

Бренд: Ecco Страницы: 17

ActiveFinder One

Бренд: LaserLiner Страницы: 92

Бренд: Waters Страницы: 250

Бренд: Waters Страницы: 141

Бренд: Bartscher Страницы: 61

Бренд: Onwa Страницы: 35

Бренд: Ebyte Страницы: 7

Бренд: Zodiac Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды