Eliet Turfaway 600, Руководство пользователя

Страница: 67 / 88

67
English
II. Hinges
Several articulation points are equipped with self-lubricating nylon bushings. Since this
concerns dry lubrication there is no need to apply lubrication. However, you must still check
these parts for wear or dirt. This could cause excess slack, leading to breakage or poor opera-
tion. Dirt could cause hinges to get stuck and prevent the machine from working properly.
The points with dry lubrication are:
1. Hinges on the arm for the tensioning rollers for belt drive
2. Hinges on the setting arm for work-depth setting
3. Hinge for operating rods to hydrostatic pump
4. Joystick hinge
If slack is perceived at these points the machine must be taken to the ELIET dealer for repair.
The machine has a number of hinges that require lubrication:
a. Ball joints on the operating rods to the hydrostatic (6x)
• Before lubricating these hinges, where possible first remove the old lubricant. To do
so, spray a cleaning spray and allow the product to work. ELIET recommends NOVATIO
KLEENSPRAY-S.
• Wipe off the cleaning spray and blow the zones clean with compressed air.
• Inject the hinging parts with new lubricant. Use the lubricants listed in “11.3. Lubricants”
on page 61.
1 2
3 4