Eliet Turfaway 600, Руководство пользователя

Страница: 29 / 88

29
English
9. Operating instructions
9.1. Preliminary checks
Caution: Before commencing work, it is recommended to get into the habit of
checking the following points:
Checklist
• Check the total number of hours the machine has operated and compare this to the maintenan-
ce table. Perform maintenance as necessary. (read § 11.2; page 61)
• Check the oil level. Pull out the dipstick and check whether the oil level is below minimum (read
§ 11.4.3; page 64)
• Check in advance that the fuel tank is full. If not, fill it up (read § 9.3; page 38)
• Check the air filter for excessive dirt. Clean it if necessary. (read § 11.4.4; page 65)
• Check whether the blade is clean and there is no mud stuck on. The horizontal blade and the
three vertical blades must be cleaned beforehand.
• Check the blades for wear and tear. Sharpen the blade or replace as necessary. (read § 11.5.4;
page 72)
• Check that the blade has not been distorted or broken. Straighten or repair the blades, or
replace them if necessary. (read § 11.7.3; page 79)
• Check that the belt tension is adequate. If not, it can be adjusted. (read § 11.5.3; page 71)
• Check whether the depth has been set correctly. (read § 9.2.1; page 30)
• Check that all protection covers are present and properly in place.
• Check that all safety features on the machine are still operating properly. (read § 7.2; page
17)
• Check whether the engine operates at the given rotational speed (3,200 RPM) Never attempt
to change the default engine settings. Install the optional hour counter, this has a built-in revo-
lution counter making this easy to check.
(art. code: BE 412 410 001)
Once these points have been checked and approved, the work area can be prepared (read § 9.4;
page 39) and the machine can be moved onto it.