E-FLITE Blade CP, Руководство пользователя

Страница: 23 / 68

23
3-in-1 Control Unit Description, Arming and Motor Control Test
The unique 3-in-1 Control Unit installed on your Blade CP+ is a lightweight combination of main motor
and tail motor mixer, main motor and tail motor electronic speed controls and piezo gyro. The 3-in-1
unit also contains a gyro gain trimmer pot, proportional tail rotor mix trimmer pot and status LED.
While each Blade CP+ model is test flown at the factory with adjustments made to both the gain and
proportional trimmer pots, further adjustments to these trimmer pots may be required based on the
performance of the battery used, or preference and flying style of the pilot. However, before any
changes to the trimmer pots are made, test flights will need to be conducted. Use the following check
list for your first and all subsequent flights:
The following checklist contains the steps you must follow to ensure proper arming and operation of
the 3-in-1 unit as well as proper motor response:

Each time before you fly you must ALWAYS turn on the transmitter power first before
connecting the flight battery to the 3-in-1 unit. Never connect the flight battery to the 3-in-1
unit before powering on the transmitter first. After each flight, be sure that you never turn off
the transmitter before disconnecting the flight battery from the 3-in-1 unit first.
Also, be certain to fully extend the transmitter antenna before flight.
Note: The antenna exiting the receiver will be coiled around the landing skid struts. We have made
many successful flights indoors and out (some nearly out of sight) with the antenna coiled this way
and did not experience any problems with performance of the radio system. If you are tempted to
uncoil this antenna, please be sure to route it safely away from all moving parts and electronic items.
Remember, due to the relatively small size of the Blade CP+, you will not want to fly it very far away
from yourself in order to keep proper orientation.