E-FLITE Blade CP, Руководство пользователя

Страница: 29 / 68

29
Understanding the Controls
If you are not familiar with the controls of your Blade CP+, please take a few minutes to familiarize
yourself with them before attempting your first flight.
The left-hand stick on the transmitter controls both throttle/collective pitch (climb/descend) and rudder
(yaw left/right). When the left-hand stick and throttle trim lever are in their lowest positions, the main
rotor blades will not spin. Advancing the stick upward will increase the speed and pitch of the main
rotor blades. Increasing the speed and pitch of the main rotor blades will cause the model to climb.
Throttle Trim
Climb
Decreasing the speed and pitch of the main rotor blades by lowering the left-hand stick will cause the
model to descend.
NOTE : When you are in the “Idle Up” flight mode (as outlined on pages 37–38), lowering the
left-hand stick will actually cause the speed of the main rotor blades to increase while also
increasing the amount of negative pitch the main rotor blades can offer. This allows the model to
be flown inverted and to perform aerobatics like loops and rolls when the optional-use symmetrical
rotor blades are installed.
Throttle Trim
Descend
After lifting the model off the ground you can balance the throttle by carefully moving the left-hand
stick up and down so that the model will hold a stationary hover without climbing or descending.