22
If at any time during the test the controls do not respond properly, double-check the servo reversing
switches on the transmitter. They should be positioned as follows:
AIL – NOR
ELE – REV
THR – NOR
RUD – REV
If the controls still do not respond properly after ensuring the servo reversing switch positions are
correct, you may also check the servo connections to the receiver. These should be positioned as
follows (when viewing the helicopter from behind):
Channel 1 – Right-hand rear “aileron” servo
Channel 2 – Forward “elevator” servo
Channel 6 – Left-hand rear “pitch” servo
Once you have confirmed proper reversing switch and servo connection locations, all controls should
be functioning properly. If you do encounter any problems with your Blade CP+ responding properly
to the transmitter, do not fly. Call Horizon’s Product Support staff at 1-877-504-0233.
If you have confirmed proper control operation of your Blade CP+, unplug the flight battery from
the 3-in-1 unit and reconnect the main and tail motor plugs to the 3-in-1 unit, taking care to keep
the proper polarity and location of each as they were before the test. The tail motor plug should be
installed into the upper output slot of the 3-in-1 control unit with the positive lead to the top. The main
motor plug should be installed into the lower output slot with the positive lead to the bottom. Please see
the photo found on page 23 for reference.
Содержание Blade CP
Страница 66: ...66 Notes ...
Страница 67: ...67 Notes ...
Страница 68: ...10838 2007 Horizon Hobby Inc 4105 Fieldstone Road Champaign Illinois 61822 877 504 0233 www E fliteRC com ...