Docomo N-09A, Инструкция по эксплуатации

Страница: 339 / 572

337
Data Managem
ent
Using Infrared/iC Communication
Exchange data such as phonebook entries and
received mail with other devices equipped with the
infrared data exchange or iC communication function.
z
The data exchange function of the FOMA terminal
via infrared data exchange/iC communication
conforms to the IrMC™1.1 standard. However, you
may not be able to transfer data depending on the
other party’s device or the application even when
IrMC™1.1 is supported.
z
You can transfer a single data at a time or all data
at once.
z
Table 2 (p.338) shows data that can be transferred.
Note on data transfer
z
You cannot transfer data while Dial lock, Self mode,
Omakase Lock or Keypad lock is set. Also, you
cannot use iC communications when IC card lock is
set.
z
You cannot receive phonebook data while Restrict
dialing is set. However, you can send phonebook
data with “Restrict dialing” set and My Profile data
when sending the phonebook data.
z
You may not be able to transfer data depending on
the status of the other party’s device. Also, depending
on the other party’s device, the settings of the
received mail or bookmark folder tree may not apply,
or the Deco-mail content may not be saved correctly.
z
The FOMA terminal is out of service area during
data transfer, and you cannot make/receive a voice/
videophone call, PushTalk, use i-mode, i-mode
mail, packet communication or 64K data
communication. Also, the FOMA terminal may
remain out of service area for a while after data
transfer is finished.
z
It may take time to transfer data depending on the
amount of data. Also, you may not be able to
receive data.
z
The progress bar indicates the number of sent data
as an approximate guide. A large amount of data
may slow down the progress indicator or it may
look different between the parties even when the
data is being transferred successfully.
N
<Phonebook>
z
Copying the phonebook from the FOMA terminal
(Phone) to the FOMA card (UIM) converts
“katakana” included in name and reading to
double-byte. Up to 10 double-byte or 21 single-
byte characters for name and up to 12 double-byte
or 25 single-byte characters for reading will be
copied, and the excess characters are not copied.
z
As the numbers of phone numbers and mail
addresses that can be stored in a single
phonebook entry on the FOMA terminal (Phone)
and FOMA card (UIM) are different, the second
and subsequent phone numbers/mail addresses
in the FOMA terminal (Phone) cannot be copied to
the FOMA card (UIM).
z
As the types of characters that can be used on the
FOMA terminal (Phone) and FOMA card (UIM)
are different, some characters may be converted
to spaces or other characters.
z
Phonebook entries stored as secret data cannot
be copied using this function even when in “Secret
mode” or “Secret data only mode”.
z
If the same group names are set on the FOMA
terminal (Phone) and the FOMA card (UIM), the
phonebook group settings are retained. If there is
no group with the same name, the entries are
saved to “No Group”.
<SMS>
z
Copying sent SMS will also copy the SMS reports
for the sent SMS. You cannot copy the SMS
reports only.
z
You cannot protect SMS moved or copied to the
FOMA card (UIM). If you move or copy protected
SMS to the FOMA card (UIM), the protection is
removed from the SMS in the FOMA card (UIM).
The “Replied to” or “Forwarded” mark also
changes to “Read”.
z
When SMS sent to Number B of 2in1 is moved or
copied, it is saved as SMS to Number A.