Docomo N-09A, Инструкция по эксплуатации

Страница: 103 / 572

101
Sound/Screen/
Light Settings
Changing Ringing Tone
<Melody Call setting>
Set whether to change the ringback tone heard by the
other party (YES/NO) when you receive a voice call.
1
i
X
“Settings/NW Service”
X
“Incoming call”
X
“Melody Call
setting”
X
“YES” or “NO”
When “YES” is selected, the Melody Call i-mode
site is accessed. Packet communications
charges do not apply for the setting site.
However, the IP site, i-mode menu site and free
music page incur packet communications
charges.
Follow the on-screen instructions.
Setting Keypad Sound
<Keypad sound>
z
Setting this function to “OFF” also disables the
battery level tone and each warning tone.
z
The keypad sound is played at the volume set in
“Volume” during a call, and fixed at a given volume
while not talking on the phone.
1
i
X
“Settings/NW Service”
X
“Other settings”
X
“Keypad
sound”
X
“ON” or “OFF”
Setting the Notification Tone
and Illumination for GPS
Function
Set the notification tone and illumination for Position
location, Location notification and request.
z
If “Permit to send loc.” under “Loc. request setting”
is set to “ON” and Public mode (Driving mode) is
set, the location information is sent upon request
without notification tone, vibrator or illumination.
Setting the notification tone/vibrator
1
i
X
“LifeKit”
X
“Map/GPS”
X
“Map/GPS settings”
X
“Tone/
Vibrator”
2
Select any item:
Ring volume
……
Select an item, then use
c
to
adjust volume.
Select ring tone
……
Select an item to set the
notification tone, then select Melody/OFF (no
notification tone).
Vibrator …… Select an item to set the vibrator,
then select Pattern 1 to 3/Melody linkage/OFF
(no vibration). When Melody linkage is selected,
the FOMA terminal vibrates to the pattern of the
melody set as a notification tone.
Ring time
……
Select an item to set the ring
time, then select ON/OFF (no notification).
When ON is selected, enter the ring time (2
digits from 01 to 30 seconds)
*
.
*: For “Loc. request/confirm”, enter a 2-digit number
from 01 - 20.
Setting the illumination
1
i
X
“LifeKit”
X
“Map/GPS”
X
“Map/GPS settings”
X
“Illumination”
2 Select an item
X
Select any item:
Color 1 - 7 …… Flash in the selected color.
Gradation
……
Flash in the order from Color 1 to
7.
OFF
……
Do not flash. OFF cannot be set when
Loc. request/permit or Loc. request/confirm is
selected.
N
z
Melody Call is not played when the other party
dials from Videophone or PushTalk.