Docomo N-09A, Инструкция по эксплуатации

Страница: 214 / 572

212
i-moti
on/Movie/i-Channel/
i-concier
1 On the standby screen
X
Select the
received pop up message
The i-concier screen and information details
appear.
■ To stop pop up message
X
y
or
t
(1 second or longer)
2
Select information
■ If the link guide is displayed
X
d
The information on the link appears.
● Displaying from a screen other than the
standby screen
When “Receiving setting” under “Mail Setting” is set
to “Alarm preferred”, the “Received information”
screen appears if information is received while the
standby screen is not displayed.
1 Receive information automatically
The Received information
screen appears.
2
d
The i-concier screen appears.
Setting i-concier
Configure the information display
setting for the standby screen
<Information display>
1
i
X
“Settings/NW Service”
X
“Display”
X
“Information display”
X
“ON” or “OFF”
Setting the i-concier ring tone
<Select ring tone>
Set the ring tone, illumination and vibrator for
information reception.
z
Ring volume setting → p.67
z
Ring tone setting
→
p.98
z
Ring time setting → p.102
z
Vibrator setting → p.100
z
Illumination setting → p.111
Setting information reception
<Receive information setting>
The settings include rail information, road traffic
information, earthquake information, event
information, etc. Only specified information can be
viewed. You can also set reception stop/resume,
reception hours, etc. or check the current settings.
1
i-concier screen (p.210)
X
o
(MENU)
X
Select “ ”
2 “
インフォメーション受信設定
”
(Information receive settings)
3 Configure the settings
N
z
When Original lock is set on “Disp. recv. mail/
msg.” under “Incoming/Mail disp.”, a pop up
message or “
” does not appear on the screen
and incoming operations (ring tone, vibrator,
illumination flashing) are not performed even if
information is received.
z
The i-concier screen may not appear but only a
site or information may appear depending on the
information.
z
When Original lock is set on “i-concier” under
“Data disp. edit del.” and information is received,
the popup message “Receiving new information”
appears on the standby screen. When the popup
message is selected, the i-concier screen appears
regardless of the content.
N
z
When “Receiving setting” under “Mail Setting” is
set to “Operation preferred”, a pop up message
does not appear on the screen and incoming
operations (ring tone, vibrator, illumination
flashing) are not performed even if information is
received while the standby screen is not
displayed. “
” appears at the top of the screen.