Docomo N-09A, Инструкция по эксплуатации

Страница: 539 / 572

22
Setting up the access point (APN)
Communication software to enter AT commands is required for the settings. This section describes
how to set it up using "Hyper terminal" that comes with Windows.
d
Windows Vista is not compatible with "Hyper terminal". For Windows Vista, set with compatible
software. (Follow the instructions for the setting of the software.)
Access points <APN/cid>
d Normal telephone numbers are not used for access points for packet communication unlike 64K data
communication. Set up APN instead of a telephone number for connection.
d
The APN setting is just like registering a Phonebook for packet communication from a PC. Assign
registration number (cid) 1 through 10 to register, which is used as a part of the access point number.
As the APN of mopera "mopera.ne.jp" is assigned to cid1 and APN of mopera U "mopera.net" to cid3
by default, assign the APN to cid2 or between cid4 to cid10.
*1
d
APN is administered by "cid (administration numbers 1 through 10)". Specifying " ＊ 99 ＊＊＊ <cid
number>
＃
" as the access point number enables the connection to the access point with the cid
number.
d
Specifying " ＊ 99 ＊＊＊ 1 ＃ " as the access point number for the mopera connection or " ＊ 99 ＊＊＊ 3
＃
" for the mopera U connection enables you to use mopera or mopera U easily.
*2
d
The APN setting registers the access point to the FOMA terminal just like registering other parties'
information (telephone number, etc.) on a mobile phone. The following are comparisons with the
Phonebook of the mobile phone:
d
Registered cid will be connection numbers in the dialup connection settings.
d
Contact your Internet service provider or network administrator for an access point (APN) other than
mopera U or mopera.
*1 ： Set up the APN setting for the access point (Internet service provider) on the FOMA terminal in advance instead of entering
APN in the Telephone Number column of "
ダイヤルアップネットワーク " (Dial-up Network) for connection.
*2 ： To connect to other Internet service providers, set the APN and assign it to cid2 or cid4 to cid10.
<Example: Using the FOMA USB Cable with Charge Function 02 on Windows XP>
1
Connect the FOMA USB Cable with Charge Function 02 (optional) to the
FOMA terminal
2
Turn on the FOMA terminal, then connect the FOMA USB Cable with Charge
Function 02 connected to the FOMA terminal to the PC
Default setting cid1
：
mopera.ne.jp cid3
：
mopera.net cid2, 4 to 10
：
not set
APN setting Phonebook of mobile phone
Data to be registered APN Phone number
cid Memory number of Phonebook
─ Other party's name
How to register Register using PC
○
(DOCOMO Connection Manager,
etc.)
○
(Dedicated software required)
Register using Mobile phone
×
(Cannot even confirm)
○
How to use Specify cid to connect Look up Phonebook to call
─ Enter the telephone number directly
from the dial key on the FOMA
terminal to call.