Docomo N-09A, Инструкция по эксплуатации

Страница: 78 / 572

76
Vo
ice/Videophone Ca
lls/PushTalk
Using Videophone Call by
Interfacing to External Device
You can make or receive videophone calls from
external devices such as a PC by connecting the
FOMA terminal to the device using the FOMA USB
Cable with Charge Function 02 (Optional).
To use this function, you have to install a videophone
application on the dedicated external device or PC
and prepare commercially available devices such as
an earphone/microphone and USB compatible Web
camera.
z
Set USB mode to “Communication mode”. No
specific settings are required to connect external
devices.
z
For details on the operating environment, settings,
operating procedure of the videophone application,
refer to the manuals supplied with the external
devices.
z
“ ドコモテレビ電話ソフト ” (DOCOMO Videophone
Software) (Japanese) is compatible with this
function.
Download the software from the NTT DOCOMO
website (Japanese).
Checking Inside Room When
You Are Out
<Remote monitoring>
Remote monitoring is only available between FOMA
terminals or between a FOMA terminal and a phone
equipped with a 3G-324M-compatible videophone
function. The FOMA terminal can be used as the
dialing or receiving phone for remote monitoring.
Preparing the receiving phone
Set the phone number of the dialing phone (Other ID)
and the delay until remote monitoring begins (Ringing
time) on the phone performing remote monitoring
(receiving phone).
z
Up to 5 other IDs can be stored.
1 Videophone settings screen (p.73)
X
“Remote monitoring”
X
Enter
your security code
X
“Other ID”
2
Highlight an item to be stored or
changed
X
Enter the phone
number to accept monitoring
3 Press
t
to return to the remote
monitoring screen
4
“Ringing time”
X
Enter ring time
(003 to 120 seconds in 3 digits)
The ringing time is set.
5 “Set”
X
“ON”
“ ” or “ ” appears on the
standby screen.
■ To turn remote
monitoring off
X
“OFF”
6 Position the FOMA terminal
During remote monitoring, the image captured
with the front camera is sent to the dialing phone.
Place the receiving FOMA terminal in the
monitoring position, and make sure it is switched
on and open.
If the FOMA terminal is left open, only the voice
is sent and the camera image is not sent. The
substitute image is sent with “
カメラオフ
Camera Off” displayed on the image.
N
z
You cannot make a videophone call from the
external device during a voice call.
z
When you have subscribed to Call Waiting, Voice
Mail or Call Forwarding and you receive a
videophone call from an external device during a
voice call, you can answer the call after ending the
current call. When you receive a voice call,
videophone call or 64K data communication
during a videophone call from the external device,
you can answer the call in the same way.
N
z
When positioning the FOMA terminal, set
“Videophone” under “Vibrator” to “OFF” to prevent
the FOMA terminal from moving when calls are
received.
z
If the ringing time set for “Voice Mail” and “Call
Forwarding” on the receiver side is shorter than the
ringing time set for remote monitoring, “Voice Mail
Service” and “Call forwarding” take priority.
Other ID
Function menu
¨
p.77
Front camera
Adjust the angle