Docomo N-09A, Инструкция по эксплуатации

Страница: 299 / 572

297 Continued on next page
Map/GP
S Function
Making service settings
Access a host set in “Setting the host” (p.296) and
make the settings for location request.
1 Map/GPS menu screen (p.292)
X
“Map/GPS settings”
X
“Loc.
request setting”
X
“Service
settings”
X
Make the settings
For how to make the settings, contact the
service provider (Japanese).
●
If location information is requested
If location information is requested by the other party,
the current location is positioned and the information
is provided to the party.
z
If the settings for each service are set to confirm every
time before sending, a confirmation message appears.
Notifying Location
Information
<Location notification>
Show your current location information to service
providers, etc. supporting location notification.
z
Charges apply to use of the location notification
function.
z
To use a service supporting location notification, a
subscription to the service provider may be
required. The service charges may apply.
z
To use the location notification function, see the
service provider’s or NTT DOCOMO website.
Registering a party to report location
information to
<Register LCS client>
z
Up to 5 clients can be stored.
z
No client is stored at the time of purchase.
1 Map/GPS menu screen (p.292)
X
“Map/GPS settings”
X
“Notification menu”
X
Register
LCS client
X
“LCS client”
N
z
When you access a site via “Service settings”
overseas, an error message appears and the
service cannot be used. Even in this case, packet
communications charges apply.
N
z
Location information may not reach the service
provided depending on the signal quality, etc.
z
The destination may not appear on the screen.
z
In Public mode (Driving mode), the following will
apply:
• If the settings for each service are set to confirm
every time before sending, location information
is not provided on request.
• If the settings for each service are set to accept
location request, the ring tone, vibrator and
illumination do not work but location information
is provided only by the screen display.
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔ
Ｓｅｎｄｉｎｇ
Ｐｒｅｓｓ ｃｌｅａｒ ｋｅｙ
ｔｏ ｃａｎｃｅｌ
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔｅｄ ｆｒｏｍ：
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔ
Ｃｏｍｐｌｅｔｅｄ
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔｅｄ ｆｒｏｍ：
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
z
When the party using imadoco kantan search
requests location information
• Each time a request is made, the location
request confirmation window appears. If “YES”
is selected, the rough positioning result is
immediately reported to the party. After “YES” is
selected, the GPS positioning screen appears.
• Even though the location request is interrupted
after “YES” is selected, the rough positioning
result is reported to the party. In this case, it is
recorded in the location history but location
information is not displayed.
• See the NTT DOCOMO website for imadoco
kantan search.
N
z
This function notifies the location information by
Number A, regardless of the mode in 2in1.
N
Register LCS client
Function menu
¨
p.298