Docomo N-09A, Инструкция по эксплуатации

Страница: 80 / 572

78
Vo
ice/Videophone Ca
lls/PushTalk
Making a PushTalk Call
<PushTalk dial>
1 Enter a phone number
X
@
• When the other party
answers the call, a tone
beeps, and the “PushTalk
talking” screen appears.
• The other party’s voice
comes from the speaker.
■ To talk with more than
one party
Make a call using the
PushTalk phonebook.
→ p.82
■
To release handsfree
X
o
( )
You can set “Hands-free setting” (p.84) to not
answer calls using handsfree.
2
Hold down
@
while you talk
• When you obtain the right to speak, a tone
beeps, and you can speak.
• While another party is talking, you cannot
obtain the right and an error tone sounds.
• When
@
is released, a tone sounds, and
another member can speak.
• When an earphone/microphone (optional) is
connected, you can speak by holding down the
switch of the earphone/microphone.
• When a member leaves a PushTalk conversation
(ends the call), a tone sounds.
■ Adding members
Even after a PushTalk call has started, you can
still call and add members.
→
p.80
3 To end the call, press
y
Other parties hear the tone.
■ To rejoin a PushTalk call
Even if you end a call, you can rejoin the call if
other parties continue the call.
→
p.79
N
<Dial>
z
You can also make PushTalk calls using the
regular phonebook, Redial/Dialed calls/Received
calls, or Phone To.
“Redial/Dialed calls/Received calls of PushTalk”
→ p.79
z
The Caller ID setting for PushTalk calls is in accord
with the “Caller ID Notification” (p.50) setting.
z
When “Set Caller ID” is set to “ON” and a call is
made, each member who receives the call is notified
of all the other members’ phone numbers. When set
to “OFF”, “User unset” appears on the PushTalk
talking screen of all members who received the call.
PushTalk talking screen
z
A PushTalk call cannot be made during a voice
call, videophone call, or data communication.
z
If a PushTalk call is made during i-mode, the
i-mode communication is disconnected. Also, if a
PushTalk call is made while i-
α
ppli is running, the
i-
α
ppli stops.
z
When a videophone or another PushTalk call, or
64K data communication arrives during a
PushTalk call, the new call is recorded in
Received calls, and the current PushTalk call
remains connected.
z
Speaking time is limited with each right to speak.
When the time draws to an end, the speech right
release notice tone sounds and a message
appears indicating that the duration is almost over.
When the duration is over, the speech right will
end.
z
If the PushTalk button is not pressed by any
member of the group (if nobody speaks) for a
given time, the connection is automatically cut.
z
The speaker will bear PushTalk communications
charges when the speaker presses
@
and a tone
beeps (charges apply every time he/she obtains
the right to speak).
z
Emergency calls (110, 119 and 118) cannot be
made using PushTalk.
z
The Outgoing number selection screen appears
when the 2in1 is in Dual mode. Select “Number A”.
z
PushTalk calls cannot be made when 2in1 is in B
mode.
<End>
z
When “Setting when folded” (p.84) under
PushTalk setting is set to “End the call”, you can
end a PushTalk call by folding the FOMA terminal
during the PushTalk call. However, when the
earphone/microphone is connected, the call
continues.
z
Pressing the switch of the earphone/microphone
does not end a PushTalk call even if the
earphone/microphone is connected.
N