Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 238 / 579

236
e11_dt20_7e.fm
[236/260]
i-
a
pp
li
2
Select software to run
/ t
.
A message may appear depending on the software. Operate
according to the message.
H
Software to save i-
a
ppli used data to a microSD Memory
Card
=
Software set to FOMA card operation restriction
l
Osaifu-Keitai compatible i-
a
ppli software
B
Software incompletely downloaded
A
Software transferred using iC transfer service
(
n
P. 262)
Note
If the FOMA card used for downloading the software is not
inserted, some i-
a
ppli may not run (start).
When the time set for Alarm (Alarm/Schedule alarm/Reception
reserve alarm/Record reserve alarm) arrives, running software
stops and the alarm screen appears. The software resumes when
the alarm screen is closed. However, depending on the i-
a
ppli, the
software may be ended when the alarm activates.
Mail-type i-
a
ppli can also be started from Inbox, Outbox or Unsent
messages. Select the mail-type i-
a
ppli folder from each folder list.
Depending on the i-
a
ppli, if a new version of the software is
available, a confirmation screen for upgrading the software
appears at startup.
Some i-
a
ppli may save i-
a
ppli used data to the microSD Memory
Card. Saved i-
a
ppli used data can be checked in the i-
a
ppli used
data list. Check i-
a
ppli used data properties for the software that
uses an i-
a
ppli used data (
n
P. 258).
If the microSD Memory Card or the battery pack is removed while
the i-
a
ppli used data is being saved/deleted, the data may be
unable to be viewed. In this case, format the microSD Memory
Card with FOMA SH905iTV. Formatting deletes all the data in the
microSD Memory Card.
Some data saved on the microSD Memory Card may not be
available on other models.
Reading/Writing data saved on/to microSD Memory Card from
i-
a
ppli may become impossible while other running functions are
using the card.
Mail-type i-
a
ppli is not available when the 2in1 mode is set to [B
mode].
Starting i-
a
ppliDX software
Some i-
a
ppliDX software may transmit data to verify the validity of
the software regardless of the software Network set. The number
of connections and connection time differ depending on the
software.
If the correct date and time are not set, validity cannot be checked
and the software cannot start.
If the software is not validated, it cannot start until the validity is
checked.
Related Operations
Set volume
<i-
a
ppli volume>
In the Custom menu, select [i-
a
ppli]
/
[i-
a
ppli volume]
/
adjust the volume with
u / t
.
View software description
<Software info>
In the software list, select software
/ C /
[Software info].
Set whether to display the battery icon
<Battery icon>
In the Custom menu, select [i-
a
ppli]
/
[Battery icon]
/
select the setting
/ t
.
Note
dt20_E.book 236 ページ ２００７年１２月２５日 火曜日 午後２時２２分