Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 572 / 579

39
Manual for PC connection setting_DT20.fm
J
Packet transmissions
J
64K data communications
J
Command name: +CGDCONT=
[parameter]
Overview
Sets host (APN) accessed when establishing
packet transmission.
Not stored in FOMA terminal’s memory with AT&W
commands. Not reset with AT&F or ATZ commands.
Syntax
+CGDCONT=[<cid>[,“<PDP_type>”[,“<APN>”]]]
o
Parameter description
<cid>
*
:1 to 10
<PDP_type>
*
:PPP or IP
<APN>
*
:Any number
<cid> is a number for managing hosts (APNs)
used for packet transmission, registered in the
FOMA terminal. It can be set between 1 and 10 in
the FOMA terminal. The default settings are
mopera.ne.jp for <cid>=1 (<PDP_type> is
“PPP”) and mopera.net for <cid>=3
(<PDP_type> is “IP”). Set cid in 2 or 4 to 10. APN
is a user-specified character string for each
connection, indicating the host.
Execution example
Command when registering host (APN) name
“abc” (for <cid>=2)
AT+CGDCONT=2,“PPP”,“abc”
o
OK
Operation when parameter is abbreviated
AT+CGDCONT=
Clears all <cid> settings. Resets <cid>=1 and 3
settings to default values.
AT+CGDCONT=<cid>
Clears specified <cid> setting. Resets <cid>=1
and 3 settings to default values.
AT+CGDCONT=?
Displays list of values that can be set.
AT+CGDCONT?
Displays current settings.
J
Command name: +CGEQMIN= [parameter]
Overview
Registers criterion determining whether to permit
QoS (Quality of Service) sent from the network
when establishing PPP packet transmission.
The command execution examples below
describe the four available setting patterns.
Not stored in FOMA terminal’s memory with
AT&W commands. Not reset with AT&F or ATZ
commands.
Syntax
AT+CGEQMIN=[<cid> [,, <Maximum bitrate UL>
[, <Maximum bitrate DL>]]]
o
Parameter description
<cid> * : 1 to 10
<Maximum bitrate UL>
*
: None (initial setting) or 384
<Maximum bitrate DL>
*
: None (initial setting) or 3648
<cid> is a number for managing hosts (APNs)
used for packet transmission, registered in the
FOMA terminal. It can be set between 1 and 10 in
the FOMA terminal. The default settings are
mopera.ne.jp for <cid>= １ and mopera.net for
<cid>=3. Set cid in 2 or 4 to 10. [Maximum bitrate
UL] and [Maximum bitrate DL] set the minimum
uplink and downlink transmission speed (kbps)
between the FOMA terminal and base station.
When set to [None] (default setting), all speeds
are permitted. Note that when set to “384” and
“3648”, connections established under these
speeds are not permitted, so packet transmission
connection may not be established.
Reasons for Disconnection
Value Reason
27 Host (APN) does not exist, or was incorrect.
30 Disconnected by network.
33 No packet transmission subscription.
36 Disconnected properly.
Value Reason
1 Specified number does not exist.
16 Disconnected properly.
17 Line busy.
18 Number was dialed, but no response
received within specified time.
19 Dialed number is making a call.
21 Dialed number refused incoming call.
63 Network service or option is not valid.
65 Transmission capacity not provided was
specified.
88 Dialed number of terminal with different
terminal attribute, or call was received.
Error Reports
Numerical
display
Text display Reason
10 SIM not inserted FOMA card not inserted.
15 SIM wrong A non-DoCoMo SIM (IC
card equivalent to FOMA
card) is inserted.
16 incorrect
password Password is incorrect.
100 unknown Unknown error occurred.
More on AT Commands
Manual for PC connection setting_DT20.fm 39 ページ ２００７年１２月２５日 火曜日 午後３時４５分