Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 93 / 579

91
e04_dt20_7e.fm
[91/96]
PushTalk
1
When PushTalk is received, the ring tone sounds
and the called LED flashes.
The following operations can be performed during an incoming call.
Quick silent (
n
P. 115)
Manner mode enable/disable (
n
P. 115)
To disconnect: Press
H
(When the FOMA terminal is
closed: Press
:
).
2
Press
&
(
q
)/
s
.
A PushTalk call can also be received with Any key answer
(
n
P. 71).
When receiving a PushTalk call in the Cycloid position, switch to
the normal position to receive the call (
n
P. 71).
A call is answered with hands-free if the FOMA terminal is
closed. The operation follows Hands-free PT when the FOMA
terminal is open (
n
P. 96).
a
at the upper left of the display lights and the PushTalk
transmission screen appears.
The transmission procedures are the same as those of
“Sending PushTalk transmissions” on P. 89.
For details on adjusting the volume
n
“Adjusting the volume
during a call” on P. 72
3
Press
H
to end the transmissions.
Receiving PushTalk transmissions
Note
When Set auto answer is set to [ON], received PushTalk calls are
automatically answered with hands-free. However, calls are not
answered automatically even if Set auto answer is set to [ON]
while in the Manner mode.
To accept/reject calls from specified callers, set Accept calls,
Reject calls, and Reject unknown. The settings are common with
voice/Videophone call. However, they are not applied to
transmissions from PushTalkPlus.
PushTalk calls received during a voice/Videophone call or data
transmission are not connected. During a voice call, the call is
recorded in Received calls, and the stock icon
B
(missed call)
appears. During a Videophone call or data communication, the call
is not recorded.
When a Videophone call, 64K data communication, or different
PushTalk call is received during PushTalk transmission, the call is
recorded in Received calls and the PushTalk transmission is
continued. When Set PushTalk arrival action is set to [Answer],
press
s
to end PushTalk transmission and answer voice calls
received during PushTalk transmission. If Set PushTalk arrival
action is set to other than [Answer], the call is recorded in
Received calls and the PushTalk transmission is continued.
When i-mode arrival action is set to [PushTalk preferred], i-mode
transmission is disconnected and PushTalk is connected if
PushTalk is received during i-mode. When set to [i-mode preferred],
PushTalk is not connected nor recorded in Received calls.
When a PushTalk call is received while Public mode (Drive mode)
is set and the handset is turned on, the call is not connected but is
recorded in Received calls and the stock icon
B
(missed call)
appears. [Driving] appears for the status on the other member’s
transmission screen. The message does not appear if the other
party is one person.
Note
dt20_E.book 91 ページ ２００７年１２月２５日 火曜日 午後２時２２分