Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 92 / 579

90
e04_dt20_7e.fm
[90/96]
PushTalk
When a PushTalk sender is Myself, add a member during
PushTalk transmission.
When calling from PushTalkPlus, a member cannot be added.
Even if a member is added during transmission, it is not recorded in
Redial. It is not recorded in Received Calls on the other party’s
terminal that has been already in transmission.
Add up to four members to send a transmission as many times as
necessary. When the transmissions are already sent to four
members, re-calling a disconnected member is available, but a new
member cannot be added.
1
Press
C
during PushTalk transmission
/
[Add
member].
Alternatively, press
m
during PushTalk transmission to add a
member.
2
Select the adding method and send a transmission.
Š
Select [View phonebook]
/
select a name
/ t
.
Š Select [View PT phonebook]
/
select a name
i
(repeatable)
/ C
.
Š Select [Direct input]
/
enter a phone number
/ C
.
During PushTalk transmission, i-mode mail and Message R/F are
held at the i-mode center. However, SMS are received
automatically even during PushTalk transmission.
Related Operations
Return to a PushTalk conversation with multiple
members after disconnecting
Select Redial/Received calls
/ &
(
q
).
Note (Related operations)
When a PushTalk call is disconnected, or when a PushTalk call
cannot be answered after the PushTalk transmissions with
multiple members, the transmissions can only be rejoined by
calling the member from the Received calls/Redial if the
PushTalk transmissions are still in progress.
If the PushTalk transmission has been ended, a new
transmission is sent from you.
Add member
Adding a member during PushTalk
transmission
Note
Note
When the other party on the PushTalk transmission uses a model
which does not support the Add member function, the other party’s
terminal may operate as follows.
When a member is added, the added member does not appear and
a tone indicating that the member is connected does not sound.
When an added member speaks, [?] appears for the speaker
name field.
When an added member leaves PushTalk, a tone indicating
that the member is disconnected does not sound.
When a PushTalk sender has set the network service’s Notify caller
ID (
n
P. 55) to “Send ID”, the sender and all members’ phone
numbers are sent to all the members including the added members.
If set to “No ID”, [No ID] appears for the speaker and member fields
on the handsets of all the members including the added members.
However, when the other party on the PushTalk transmission uses a
model which does not support the Add member function, the added
members do not appear on the other party’s screen regardless of the
caller ID setting.
When the 2in1 mode is set to [A mode], the entries saved in the
phonebook whose Phonebook 2in1 set is set to [B] cannot be
displayed.
dt20_E.book 90 ページ ２００７年１２月２５日 火曜日 午後２時２２分