Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 239 / 579

e11_dt20_7e.fm
[237/260]
237
Continued on next page
i-
a
pp
li
Set the following operating conditions for each software.
Some settings are not available depending on the software.
1
In the software list, select software
/ C /
[Set
software use].
2
Select a field to set
/ t
.
3
Select the setting
/ t
.
To set other operating conditions successively: Repeat steps 2
and 3.
4
Press
i
.
Set Power saver of i-
a
ppli
<Power saver set>
In the Custom menu, select [i-
a
ppli]
/
[Power saver
set]
/
[ON]
/
select the time before activating Power
saver mode
/ t
.
Set the Program guide i-
a
ppli started from 1Seg
<Program guide key>
In the software list, select software
/ C /
[Program guide
key]
/
[Yes].
Note (Related operations)
Setting i-
a
ppli volume
Some i-
a
ppli do not have sound.
Software info
The information that appears in the description includes the software
name, version, software by, storage, profile version, compatible
models, SSL connection, and others.
The software name of the i-
a
ppli cannot be changed.
Battery icon
This is available for i-
a
ppli that is displayed in full-screen.
Power saver set
When the display turns off according to Light/Power saver
(
n
P. 119) while i-
a
ppli is running, the i-
a
ppli is paused after
the set time passes, and the battery power can be conserved.
While the following operations are performed, the Power saver
mode of i-
a
ppli is not activated. After the operations end and the
set time passes, the Power saver mode of i-
a
ppli is activated.
Packet transmission from i-
a
ppli
Access from i-
a
ppli to microSD Memory Card
To resume the software in the Power saver mode of i-
a
ppli,
press a key and select [Agree] in the confirmation screen.
In i-
a
ppli stand-by, activate i-
a
ppli so that it is run in the Power
saver mode.
Setting operating conditions for i-
a
ppli
<Set software use>
Network set Set whether data can be transmitted while
an i-
a
ppli is running.
i-
a
ppli To Set whether to start i-
a
ppli with i-
a
ppli To.
Icon info set Set whether software should be notified
regarding icons indicating unread mail and
Message R/F, battery level, Manner mode
setting and whether the handset is inside or
outside the service area, while an i-
a
ppli is
running.
To change ring
tone/image/icon
changes by
software Set whether to allow the i-
a
ppli to change
the ring tone and screen.
To show
confirmation screen
by all changes When [Allow ring tone/image/icon changes
by software] is set to [Yes], set whether to
show the confirmation screen when settings
are changed.
To access to phone-
book/call records
by software Set whether to allow the i-
a
ppli to access the
phonebook, Redial and Received calls.
dt20_E.book 237 ページ ２００７年１２月２５日 火曜日 午後２時２２分