Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 567 / 579

34
Manual for PC connection setting_DT20.fm
AT+CNUM Displays FOMA terminal phone
number.
*2
number: Phone number
type
: 129 or 145
129: Does not i international access code
145: In international access code
AT+CNUM
o
+CNUM:,“+8190
12345678”,145
OK
AT+COPS=[<m
ode>[,<format>[
,<oper>]]] Selects a telecommunications
carrier to be connected.
*2
<mode>
0:
Auto (Automatically searches network
and switch telecommunications carriers)
1: Manual (Connects to the
telecommunications carrier specified in
<oper>)
2: Cancels (disconnects) the connection to
the telecommunications carrier
※ Unsupported.
3: Does not make mapping
4: Manual auto (Performs “Auto” processing if
not connected to the telecommunications
carrier specified in <oper>)
※ Unsupported.
<format>
2:
Fixed value
<oper> is indicated by a hexadecimal number
consisting of a country code (MCC) and a
network code (MNC).
The formats are shown below.
Digit 1 of MCC...octet 1 bits 1 to 4.
Digit 2 of MCC...octet 1 bits 5 to 8.
Digit 3 of MCC...octet 2 bits 1 to 4.
Digit 3 of MNC...octet 2 bits 5 to 8.
Digit 2 of MNC...octet 3 bits 5 to 8.
Digit 1 of MNC...octet 3 bits 1 to 4.
AT+COPS
=1,2,“44F001”
o
OK
(Connects to
MCC:440MNC:10)
AT+CPAS Inquires the activity status of the
FOMA terminal.
*2
The result from this command is in the
following format.
+CPAS:<pas>
<pas>
0:
AT commands can be sent/received
1: AT commands cannot be sent/received
(does not send the +CPAS:1 result)
2: Unknown
3: AT commands can be sent/received and
the FOMA terminal is receiving a call
4: AT commands can be sent/received and
performing data communication
AT+CPAS
o
+CPAS:0
OK
AT+CPIN=<pin
>[,<newpin>] Enters the UIM password (PIN1,
PIN2).
*2
<pin>
Enters PIN1 while waiting for PIN1 input
(Enter <pin> parameter only)
Enters PIN2 while waiting for PIN2 input
(Enter <pin> parameter only)
Enters PUK1 while waiting for PUK1 input
Enters PUK2 while waiting for PUK2 input
※
Encloses this string parameter with
quotation marks (“ ”) when entering.
<newpin>
Enters a new PIN1 while waiting for PUK1
input
Enters a new PIN2 while waiting for PUK2
input
※ Encloses this string parameter with
quotation marks (“ ”) when entering.
AT+CPIN?
o
+CPIN:SIM PIN1
OK
(Indicates waiting
status for PIN1
input)
AT+CPIN=“1234”
o
OK
AT+CPIN?
o
+CPIN:SIM PUK1
OK
(Indicates waiting
status for PUK1
input)
AT+CPIN=“12345
678”,“1234”
o
OK
AT Command Overview Parameter/Explanation
Execution
Example
[M]
[M]
[M]
[M]
Manual for PC connection setting_DT20.fm 34 ページ ２００７年１２月２５日 火曜日 午後３時４５分