Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 261 / 579

259
e11_dt20_7e.fm
[259/260]
i-
a
pp
li
When the camera is started from i-
a
ppli, shot images are saved
and used as a part of i-
a
ppli.
1
While software is running, select camera startup
/ t
.
The Camera mode (still picture shooting screen) appears.
Adjust the brightness and use Auto timer and Zoom.
Use some software to set [Image size], [Continuous mode],
[Image quality] and [Frame].
2
Press
t
.
To save: Press
t
.
1
While software is running, select Bar code reader
startup
/ t
.
The Camera mode (Bar code reader) is activated.
2
Position the camera to show the bar code (JAN/QR
code)
/ t
.
An image of the bar code (JAN/QR code) is shot.
1
While software is running, select a ToruCa item
/ t
.
2
Preview/Save item.
Š Select [Preview].
Š Select [Save new]
/
select a folder
/ t
.
Š Select [Overwrite]
/
select data
/ t / i
.
[Enter time] and [Set repeat] are entered with i-
a
ppli.
1
While software is running, select an alarm setting
item
/ t / t
.
2
Select an alarm registered number
/ t
.
3
Set the alarm.
For setting alarms
n
“Setting alarms” on P. 384
Not available while in the Self mode.
1
While software is running, start Ir exchange/iC
transmission
/
[Yes].
Procedures for starting differ depending on the software.
To cancel transmission: Press
C
.
Using the camera from i-
a
ppli
Note
Some software may automatically send images and entered data
used with i-
a
ppli over the Internet. Images used with i-
a
ppli
include images shot using the camera function operated with
i-
a
ppli, images selected from My picture of Data box operated with
i-
a
ppli and images acquired using the Ir exchange function
operated with i-
a
ppli.
Using the Bar code reader from i-
a
ppli
Note
Scanned data may be used for some software.
Saving ToruCa from i-
a
ppli
Setting alarms from i-
a
ppli
Using Ir exchange/iC transmission from i-
a
ppli
dt20_E.book 259 ページ ２００７年１２月２５日 火曜日 午後２時２２分