Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 133 / 579

131
e07_dt20_7e.fm
[131/144]
Security Settings
Set two security codes, PIN1 code and PIN2 code, on the FOMA card.
These security codes are set to [0000] by default but can be changed
by the user (
n
P. 133).
The PIN1 code is a four- to eight-digit security code that is entered
when the FOMA terminal is turned on or when a FOMA card is
inserted to prevent unauthorized use by a third party. Enter the PIN1
code to enable making/receiving calls and operating the handset. The
PIN2 code is four- to eight-digit security code that is entered when
performing operations such as applying for or using Client certificates,
or resetting total cost.
Use the previously set the PIN1 and PIN2 codes when inserting an
old FOMA card into a newly purchased FOMA terminal.
PUK is an eight-digit number used to disable PIN1/PIN2 code lock.
PUK cannot be changed by the user.
If PUK is incorrectly entered a total of ten times continuously,
FOMA card is completely locked.
Change the terminal security code (four to eight digits).
Terminal security code is set to [0000] by default.
1
In the Custom menu, select [Settings]
/
[Security]
/
[Change security code]
/
enter the
current terminal security code
/ t
.
2
Enter the new terminal security code
/ t /
enter
the new terminal security code again
/ t
.
PIN1 code/PIN2 code
PUK
Change security code
Changing the terminal security code
• Client certificate operations
• Access FirstPass
compatible site
Enter PIN1 code
Contact a DoCoMo Shop
If incorrectly
entered three times
continuously
If incorrectly
entered ten times
continuously
Enter PUK
Secure when the power is
turned on
/ /
Enter PIN2 code
Set new PIN code
OK
dt20_E.book 131 ページ ２００７年１２月２５日 火曜日 午後２時２２分