Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 494 / 579

492
e22_dt20_7e.fm
[492/504]
Ap
pe
nd
ix/
E
xte
rna
l Dev
ic
es/
Tr
ou
bl
esh
oo
tin
g
Software is updated even when host for i-mode is changed to a
custom host.
Recharge battery before updating software.
Software cannot be updated during the following conditions.
While in Self mode
During a call/Outside the service area
Connected to an external device
Omakase Lock is set
Date and time are set incorrectly
Battery level is below the necessary level to update software
Updating (downloading and rewriting) software may take time.
Making/receiving calls, transmission functions and other functions
cannot be used while software is being updated (Receiving voice
calls is possible during download).
During software update, the handset makes an SSL connection
with the server (DoCoMo site). Set the Root Certificate to valid (The
default setting is [Enable]
n
P. 191).
It is recommended to update software at a location with a strong
signal and you are not moving (three bars for the antenna icon).
※ If signal status becomes weak or download is interrupted when
downloading software, update software again in a location with
good signal conditions.
If software has already been uploaded, [No update is needed.
Please continue to use as before] appears when software update is
checked.
While updating software, received i-mode mail and Message R/F
are held at i-mode center. Received SMS is held at SMS center.
If i-mode mail or Message R/F is held at i-mode center,
W
/
G
/
I
appears but will disappear when software is reloaded after update.
In addition, even if Receive option is set to [ON] and mail is
received during software update, notices may not appear on the
display after update is completed. Mail and messages are held at
i-mode center.
When updating software, information about the FOMA terminal
(model, serial number, etc.) is automatically sent to the server
(DoCoMo software update server). Sent information is only used for
software update.
If software update fails, [Rewrite failed] appears and all operations
are not available. In this case, bring the FOMA terminal to a repair
center that DoCoMo specifies.
Updating of software is not available overseas.
During software update, timer-set alarms for starting or recording
programs are not activated. In addition, watching or recording does
not start.
Using software update
dt20_E.book 492 ページ ２００７年１２月２５日 火曜日 午後２時２２分