Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 143 / 579

141
e07_dt20_7e.fm
[141/144]
Security Settings
Set the handset to reject calls (including PushTalk) when
caller ID is not sent, depending on reason.
The following are the types of non-disclosure reason. For details
n
“Answering calls/Videophone calls” on P. 70
User unset Reject payphone Reject not support
Calls received from a caller who is set to be rejected due to a
non-disclosure reason will not be connected. Calls of other
non-disclosure reasons will be connected. Rejected callers hear a
busy signal. The stock icon
B
(missed call) appears, and the
reason of non-disclosure is recorded in Received calls.
It is recommended to also set Caller ID Request Service.
Reject by reason of non-disclosure cannot be set for numbers set to
Accept calls.
Also when Reject unknown is set, Reject by reason of
non-disclosure is prioritized for calls without caller ID.
Reject by reason of non-disclosure is prioritized when set with
Public mode (Drive mode).
1
In the Custom menu, select [Settings]
/
[Security]
/
[Accept/Reject calls]
/
enter the
terminal security code
/ t
.
2
Select a reason
/ t
.
3
Select the setting
/ t
.
Set a ring tone to sound after a set number of seconds when
receiving a call (including PushTalk) from the caller not in
the phonebook (excluding a network phonebook).
This is one way to avoid a nuisance call such as one-ring phone
scam.
Reject unknown cannot be set simultaneously with Set mute ring
time.
When setting mute ring time, set to record calls disconnected during
mute ring time duration in Received calls.
1
In the Custom menu, select [Settings]
/
[Snd/
Vibrator/Manner]
/
[Set mute ring time]
/
[ON].
When [OFF] is set, the operation is completed.
2
Enter the duration
/ t
.
3
Select the setting
/ t
.
Reject by reason of non-disclosure
Rejecting calls with no caller ID
Set mute ring time
Silencing ring tone for callers not in
the phonebook
Note
Set the mute ring time shorter than ring duration for Record
message or Voice Mail Service to prioritize Set mute ring time.
Set mute ring time is activated for calls from callers in the
phonebook while Function lock is applied to the phonebook.
Public mode (Drive mode) is prioritized when set with Set mute
ring time.
When Set mute ring time and Manner mode are both activated
and the set time passes, the operation follows the Manner mode
settings. However, the answering duration for Record message
includes the time before the ring tone sounds.
dt20_E.book 141 ページ ２００７年１２月２５日 火曜日 午後２時２２分