Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 142 / 579

140
e07_dt20_7e.fm
[140/144]
Security Settings
Only accept/reject calls from specified callers. To set Accept/
Reject calls, save specified phone numbers from the saved
phonebook to the accept/reject list, and enable the function.
Save up to 20 phone numbers to the Accept/Reject calls list individually.
1
In the Custom menu, select [Settings]
/
[Security]
/
[Accept/Reject calls]
/
enter the
terminal security code
/ t
.
2
Select an item
/ t /
[Save list].
3
Select a list number
/ t
.
4
Select a name
/ t
.
To save other phone numbers: Repeat steps 3 and 4.
When the other party has two or more phone numbers, saving is
required for each number.
1
In the Custom menu, select [Settings]
/
[Security]
/
[Accept/Reject calls]
/
enter the
terminal security code
/ t
.
2
Select an item
/ t /
[ON].
Accept calls/Reject calls
Receiving/Rejecting calls from only
specified phone numbers
Saving phone numbers to accept/reject
Enabling Accept/Reject calls
Note
If an entry saved in Accept/Reject calls is edited/deleted in the
phonebook, the saved list content is also edited/deleted. However,
if Accept/Reject calls is enabled, entries cannot be edited/deleted
(except for Delete all in group/Delete all).
This setting is available only when a caller sends notify of the
caller ID. It is recommended to also set Caller ID Request Service
for Accept calls and to set Caller ID Request Service or Reject by
reason of non-disclosure for Reject calls.
Phone numbers set for Reject calls, Reject unknown, Reject user
unset, Reject payphone and Reject unsupported ID cannot be set
for Accept calls. In addition, Reject calls cannot be set for a
number set to Accept calls.
Callers not connected hear a busy signal. The stock icon
B
(missed call) appears and the caller’s name or phone number is
recorded in Received calls.
SMS and i-mode mail are received normally.
When PushTalkPlus is used, the Accept/Reject calls setting is
disabled for receiving PushTalk from a network phonebook.
FOMA card phonebook numbers cannot be set.
When a phone number is saved in the list while the 2in1 is used,
only phonebooks displayed in the mode used can be saved.
Related Operations
Register from the phonebook
<Accept calls/Reject calls>
Select a name to be saved from the phonebook
/ C /
[Edit data]
/
[Accept/reject set]
/
select a registration
list
/ t /
enter the terminal security code
/ t /
select
the list number
/ t
.
Delete the phone number in the list
<Delete>
In the save list screen, select a name
/ t /
[Delete]
/
[Yes].
If all phone numbers saved in the list are deleted after Accept/
Reject calls is set to enable, the setting is disabled.
Change the phone number in the list
<Change>
In the save list screen, select a name
/ t /
[Change]
/
select the name
/ t
.
Note
dt20_E.book 140 ページ ２００７年１２月２５日 火曜日 午後２時２２分