Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 347 / 579

345
e15_dt20_7e.fm
[345/356]
Data Display
/Ed
it/Man
age
m
en
t
If the entered authentication password matches an authentication
password entered by the receiver, data sending begins.
Note that when all data items are received, saved data will be
overwritten.
1
In the Custom menu, select [LifeKit]
/
[Receive Ir
data]
/
[Receive all]
/
[Yes].
2
Enter the terminal security code
/ t
.
Ready the sender’s FOMA terminal to send all data.
3
Enter the same authentication password entered
on sender’s FOMA terminal
/ t
.
The FOMA terminal waits to receive data. Ir exchange
automatically begins when data is sent from sender’s FOMA
terminal within 30 seconds.
To cancel Receive: While receiving data, press
C
.
4
Select [Yes].
Use the Ir exchange function from running software.
Activating i-
a
ppli from Ir exchange is also possible.
Procedures for starting Ir exchange from i-
a
ppli
n
P. 259
During Ir exchange, if a signal to activate i-
a
ppli is received from
devices supporting Ir exchange, software can be activated.
1
In the Custom menu, select [LifeKit]
/
[Receive Ir
data]
/
[Receive]
/
[Yes].
The FOMA terminal waits to receive data. Software is activated
when signal to activate i-
a
ppli is received from the sender’s
FOMA terminal.
Use the FOMA terminal’s Infrared port from i-
a
ppli software
to operate equipment supporting the infrared remote control
such as TVs and VCRs.
To use the infrared remote control function, download compatible
i-
a
ppli software.
Note
When sending all schedules, operate from Calendar or Show all schedules.
Receiving all data items
<Receive all Ir data>
Using Ir exchange with i-
a
ppli software
Activating i-
a
ppli from Ir exchange
Note
When i-
a
ppli To is set to [No], i-
a
ppli is not activated from Ir
exchange.
Cannot be activated as i-
a
ppli stand-by.
Infrared remote control
Using the infrared remote control function
dt20_E.book 345 ページ ２００７年１２月２５日 火曜日 午後２時２２分