Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 230 / 579

228
e10_dt20_7e.fm
[228/232]
Mail
Š Select [Delete all]
/
enter the terminal security code
/ t
.
3
Select [Yes].
■
Sorting Message R/F
<Sort>
1
In the messages list, press
C /
[Sort].
2
Select the sorting method
/ t
.
Area Mail is a service to receive the information such as an
emergency earthquake report provided from the Japan
Meteorological Agency.
Set the Receive setting before receiving Area Mail (
n
P. 229).
In the following cases, mail may not be displayed automatically
even if received.
During a call (a voice/Videophone call)
During packet transmission (streaming playback, data
transmission, PushTalk transmission)
While i-
a
ppli is running/During i-
a
ppli transmission
While Public mode (Drive mode) is set
During software update During pattern definitions update
During USB transmission While 1Seg is being watched
While camera is being activated While Alarm is being activated
When battery level is low
In the following situations, mail cannot be received.
While Omakase Lock is set During International roaming
While in the Self mode
Missed Area Mail cannot be received again.
Area Mail is received without i-mode subscription.
Area Mail is automatically received.
Save up to 30 Area Mails in Inbox. If it exceeds 30, Area Mails are
overwritten, starting with the oldest received date and time.
1
Receive Area Mail automatically.
2
When Area Mail is received, the Area Mail
dedicated alarm tone or ring tone sounds and
Called LED flashes red (
v
appears).
There are two types of Area Mail: For the first type, the text
automatically appears after received, and for the second type,
[Area mail received] appears.
Press
t
,
c
or
H
, and the screen before reception reappears
if message automatically displays.
When [Area mail received] appears, the screen before reception
automatically reappears in approximately 30 seconds.
Whether to automatically display Area Mail message when
received is set on the distributor side.
Note
Even if [Delete all] is selected, unread or protected Message R/F
is not deleted.
What is emergency report “Area
Mail”?
Receive Area Mail
Receiving emergency report “Area
Mail”
Note
For an emergency earthquake report, the dedicated alarm tone
(beep sound) and vibration is activated.
The tone of the Area Mail dedicated ring tone cannot be changed.
The Beep time follows the Mail ring time setting, the volume follows
the Mail ring volume and the vibrator follows the vibrator setting.
Area Mail is automatically sorted when the sort rule of the folder is
set to [All rcvd messages].
The vibrator and Called LED is activated while Manner mode is set
(When Mail ring tone of Original is set to other than “Silent”, the
dedicated alarm tone (beep sound) or the Area Mail dedicated
alarm tone sounds).
dt20_E.book 228 ページ ２００７年１２月２５日 火曜日 午後２時２２分