Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 569 / 579

36
Manual for PC connection setting_DT20.fm
A/ Performs the preceding executed
command.
*2
―
A/
OK
ATA Performs incoming process for
packet or 64K data if entered
when receiving the data.
*2
Enter “ATA184
o
” (arrival call action for
anonymous call) or “ATA186
o
” (arrival call
action for identified call) while receiving
packets.
RING
ATA
o
CONNECT
ATD Establishes communication. *2, 3
Packet transmission ATD * 99 *** <cid>#
o
When ATD * 99# is entered:
Uses <cid>=1 (default setting) (When
<cid> is not entered, setting becomes
<cid>=1).
When syntax starting with
ATD184
* 99 *** <cid># is entered:
“184” is added to host (APN) defined by
specified <cid> (Alternatively, “186” can be
added by same operation to turn caller ID
sending to ON).
64K data communications ATD
[parameter] [phone number]
o
ATD * 99 *** 1#
o
CONNECT
ATE<n> Sets whether the FOMA terminal
returns echo of AT commands
sent from the PC.
*1
n=0: Does not return echo
n=1: Returns echo (default setting)
Normally, set to n=1. If the PC has an echo
function, set to n=0. ATE1
o
OK
ATH Disconnects line when entered
during packet transmission or 64K
data communications.
*2
―
(During
communication)
+++ (Does not
appear)
OK
ATH
o
NO CARRIER
ATI<n> Displays the verification code.
*2
n=0: NTT DoCoMo
n=1: Displays abbreviated product name
(FOMA SH905iTV)
n=2: Displays the product version in a format
such as “VerX.XX”
n=3: Displays each element of ACMP signals
n=4: Displays details of the communication
functions provided in the FOMA terminal
ATI0
o
NTT DoCoMo
OK
ATO Returns to online data mode from
online command mode during
communication.
*2
―
ATO
o
CONNECT
ATQ<n> Sets whether to display result
codes.
*1
n=0: Displays result codes (default setting)
n=1: Does not display result codes ATQ0
o
OK
ATV<n> Sets manner of displaying result
codes.
*1
Displays all result codes with numbers or text.
n=0: Displays result codes with numbers
n=1: Displays result codes with text (default
setting)
ATV1
o
OK
AT Command Overview Parameter/Explanation
Execution
Example
[M]
[M]
[M]
Number cannot be dialed if characters
other than 0 to 9,
*
, #, +, A, a, B, b, C, c, D,
d, hyphens (-), spaces, T, t, P, p, !, W, w,
@, or commas (,) are included. Characters
highlighted with
can be entered but
are ignored during dialing.
[M]
[M]
[M]
[M]
[M]
[M]
Manual for PC connection setting_DT20.fm 36 ページ ２００７年１２月２５日 火曜日 午後３時４５分