Docomo Foma SH905iTV, Инструкция по эксплуатации

Страница: 116 / 579

114
e06_dt20_7e.fm
[114/128]
So
un
d/
Scree
n
/L
ig
ht Settin
g
s
Quality alarm is available only for voice calls.
1
In the Custom menu, select [Settings]
/
[Phone
settings]
/
[In-call settings]
/
[Quality alarm].
2
Select an alarm tone
/ t
.
1
In the Custom menu, select [Settings]
/
[Snd/
Vibrator/Manner]
/
[Ring time setting].
2
Select an item.
Š Select [Mail ring time set]
/
[ON].
Š Select [PT ring time set].
3
Enter the ring duration
/ t
.
Set the ring tone or alarm tone to sound only from the
earphone when the flat-plug earphone/microphone with
switch (sold separately) is connected.
Even when set to [Headset only], if no flat-plug earphone/
microphone with switch is connected, the ring tone or alarm tone
will sound from the speakers.
1
In the Custom menu, select [Settings]
/
[Snd/
Vibrator/Manner]
/
[Headset setting].
2
Select the setting
/ t
.
Quality alarm
Sounding an alarm when the signal
is weak
Note
The call may be disconnected without the alarm sounding if the
signal suddenly becomes weak.
Ring time setting
Setting the duration of mail or
PushTalk ring tone
Note
In the following case, the mail ring tone does not sound even if
mail is received.
A call is in progress i-
a
ppli is running
The camera is being activated
1Seg is being watched (excluding when using Multi Window)
Pattern definitions are being updated
Headset setting
Sounding the ring tone only from
the earphone
Note
The volume in the earphone/microphone is set using Set volume
of the various functions.
Do not wind the earphone/microphone cord around the FOMA
terminal. The internal antenna may not work properly.
Fully insert the earphone/microphone plug. Interrupted sound,
static or loud noise may result when only partially inserted.
A pop may sound when the power is turned on. This is not a
malfunction.
dt20_E.book 114 ページ ２００７年１２月２５日 火曜日 午後２時２２分