Docomo FOMA P2403, Руководство пользователя

Страница: 49 / 180

47
Installing
the
FOMA
PC
Setup
Software
Install the “FOMA PC
設定ソフト
(FOMA PC setup software)”.
See page 48 for installation.
If the old version of “W-TCP
設定ソフト
(W-TCP setup software)”
and old version of “APN
設定ソフト
(APN setup software)” are
installed, uninstall them beforehand. Otherwise the “FOMA PC
設
定ソフト
(FOMA PC setup software)” cannot be installed.
Connect to the Internet.
(
☛
page 66)
Connection
Installation
of software
Preparation
for setup
Setting
operation
Prepare for setup.
Before setting up, confirm that the FOMA terminal is connected
to and correctly detected by the PC.
For connection of the FOMA terminal and a PC, see pages 22-
23. If the FOMA terminal is not correctly detected by the PC, you
cannot configure the settings or carry out communications. To
confirm whether the FOMA terminal is correctly detected by the
PC, see page 48. For installing the “P2403 communication setup
file”, see page 30.
Set up in accordance with the communication to be used.
To set up packet communication from Easy Setting:
To use “mopera U” as an access point (
☛
page 52)
To use a provider other than “mopera U” (
☛
page 55)
To set up 64K data communication from Easy Setting:
To use “mopera U” as an access point (
☛
page 60)
To use a provider other than “mopera U” (
☛
page 63)
To optimize the packet communication performance in the W-
TCP setup (
☛
page 68)
To set an access point name (APN) (
☛
page 72)
Flow from the Installation of the FOMA PC Setup Software to Connection to the Internet
Common
to each data
communication
Common
to
Windows
®