Docomo FOMA P2403, Руководство пользователя

Страница: 103 / 180

Common
to each data
communication
101
Using
the
FOMA
Terminal
with
a
H
andheld
PC
Windows
®
CE
.NET
4.1
● When you start up the “P2403 utility software”, the message “ 初期設定中です。 (Initializing)”
appears. This is the initialization for starting up, not the initialization of various settings.
● If AT&S1 is set, you cannot use the “P2403 utility software”. Change the setting to AT&S0
(setting at purchase).
Information Information
Function Reference
Window
This displays the settings
that correspond to the item
you select. For setting
methods, see pages
118–141.
Displays may slightly
differ, but the operations
are the same.
Replace the word “click”
with “tap on” in the
instructions.
When you select a setting item from the menu bar or the
selection window, the display will change as shown below.
■
To carry out Data Communication
Exit the “P2403 utility software”. Data communication is not possible while the “P2403
utility software” is running.
Tap on “
閉じる
(Close)” at the lower-right or tap on “ × ” at the upper-right on each display.
To Exit P2403 Utility Software