Docomo FOMA P2403, Руководство пользователя

Страница: 66 / 180

64
Setting up 64K Data Communication from “
かんたん設定
(Easy setting)”
Setting up 64K Data Communication from “
かんたん設定
(Easy setting)”
64K data
communication
Common
to
Windows
®
Click “
詳細情報の設定
(Set detailed
information)”.
● Check with your provider concerning the setting
for whether or not to notify your caller ID. If this
setting is not correct, you may not be able to
communicate through some providers. You can
change the caller ID notification setting later.
(
☛
page 167)
Configure the settings according to
your provider, or LAN, and so on, then
click “OK”.
● If your provider or LAN requires dial-up
information, set the relevant addresses by
following the entry instructions and click “OK”.
6
5
When you return to the display in step
5, click “
次へ
(Next)”.
7
Set up as shown on the left.
● You can set the desired name for the connection
setting currently created. Enter a plain name in
the “
接続名
(Access point name)” field.
● You cannot use these half-pitch characters for an
access point name: ¥ , / , : , * , ? , ! , < , > , | , "
4
Enter the phone number
of the access point.
Select “FOMA P2403”.
Example: FOMA
Confirm this with your provider.