Docomo FOMA P2403, Руководство пользователя

Страница: 152 / 180

AT Command List
AT
Command
List
AT command
AT ＊ DGAPL=n
[,cid]
[M][?][=?]
AT ＊ DGARL=n
[,cid]
[M][?][=?]
AT ＊ DGPIR=n
[M][?][=?]
+++
[M]
AT+CBST
[M]
[&F][&W][?][=?]
AT+CEER
[M]
AT+CGDCONT
[M][?][=?]
Outline
Sets the APN, which
accepts incoming packet
calls.
For APN setting, use the
<cid> parameter defined
by AT+CGDCONT.
Sets the APN which
rejects incoming packet
calls.
For APN setting, use the
<cid> parameter defined
by +CGDCONT.
This command setting is
valid when a call is going
out. Even in the dial-up
network setting, you can
add “186”(notify)/
“184”(not notify) to the
access point number.
In response to the
escape sequence, the
online mode changes to
the online command
mode, while maintaining
the line connection.
Sets up the bearer
service setting.
Displays the reason for
disconnection of the last
outgoing call.
Sets the access point
name (APN) at the time
of packet dialing.
Description of parameters
n=0
：
Adds the APN defined by <cid> to
the incoming call accept list.
n=1
：
Deletes the APN defined by <cid>
from the incoming call accept list.
If <cid> is omitted, the setting applies to
all cids.
n=0
：
Adds the APN defined by <cid> to
the incoming call reject list.
n=1
：
Deletes the APN defined by <cid>
from the incoming call reject list.
If <cid> is omitted, the setting applies to
all cids.
n=0
：
Uses the APN as it is (setting at
purchase).
n=1
：
Uses the APN by adding “184”
(always not notify).
n=2
：
Uses the APN by adding “186”
(always notify).
−
<speed> 116 64K data communication
131 video-phone 32K
134 video-phone 64K
<name> 1 data circuit
synchronous
<ce> 0 transparent
<report>
List of reasons for disconnection
(
☛
page 161)
(
☛
page 156)
Command execution
example
AT ＊ DGAPL=0,1
OK
AT ＊ DGARL=0,1
OK
AT ＊ DGPIR=0
OK
+++
OK
(on-line command mode)
AT+CBST=116,1,0
OK
AT+CEER
+CEER:36
OK
(
☛
page 156)
150