Set each item on the
Enter Printer Settings
screen, and then click
Next
.
8.
On the
Printer Software
screen, specify the software that you want to install and installation path,
and then click
Next
. At this point, the wireless setting specified on the
Enter Wireless Network
Settings
screen is sent to the printer.
9.
On the
Wireless configuration is now complete
screen, create the wireless setting sent to the
printer on your computer following the steps below, and then click
Next
.
10.
NOTE:
If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
Select
Network Connections
from Control Panel.
a.
Right-click
Wireless Network Connection
and select
Properties
.
b.
Select the
Wireless Network
tab.
c.
Make sure the check box for
Use Windows to configure my wireless network settings
is
checked.
d.
Click
Advanced
.
e.
Do either of the following:
f.
When wireless ad-hoc mode is set to the printer:
Select
Computer to Computer (ad hoc) networks only
and close the
Advanced
dialog box.
When wireless infrastructure mode is set to the printer:
Select
Access point (Infrastructure) networks only
and close the
Advanced
dialog box.
Click
Add
to display
Wireless network
properties.
g.
Enter the setting that you send to printer and click
OK
.
h.
Click
Move up
to move the setting to the top of the list.
i.
Click
OK
to close the
Property
dialog box.
j.
On the
Setting-Ready Printer
screen, verify that the correct IP address is assigned to the printer to
which the wireless setting is set, and then click
Install
.
11.
If you select the
I am setting up this printer on server
check box on the
Select Printer
screen and
also select the
PostScript Driver
check box on the
Enter Printer Settings
screen, the
Adobe
Systems Inc. License Agreement
screen appears. Select the
I accept the terms of the license
agreement
option button, and then click
Install
.
12.
On the
Congratulations!
screen, click
Finish
to complete the installation. A test page will be printed
with the installed printer by clicking the
Print Test Page
button.
13.
Use the
Dell Printer Configuration Web Tool
to monitor the status of your network printer without
Содержание 3110 Color Laser
