Dell 3110 Color Laser, Руководство пользователя

Страница: 189 / 451

1.
Press until
Report/List
appears, and then press . 2.
Press until either
PCL Fonts List
or
PS Fonts List
appears.
Select
PCL Fonts List
to print a listing of the fonts available to the PCL.
Select
PS Fonts List
to print a listing of the fonts available to the PostScript
®
3™.
3.
Press . 4.
The message
PCL Fonts List Printing
or
PS Fonts List Printing
appears and remains on the operator
panel until the page prints. The printer returns to the
Ready to Print
state after the font sample list prints.
Using the Print and Hold Function
When you send a job to the printer, you can specify in the driver that you want the printer to hold the job in
memory. When you are ready to print the job, you must go to the printer and use the operator panel menus
to identify which job in the memory you want to print. You can use this function to print a confidential job
(Secure Print), delay printing a job (Store Print), or verify one copy before printing additional copies (Proof
Print).
NOTE: The printer holds the job until you delete it by using the operator panel or you turn off the
printer. The data on memory is cleared when the printer is turned off.
NOTE: Print and Hold functions require a minimum of 384 MB available print memory. Also, you need
to configure the RAM disk settings on both the operator panel and the printer driver.
NOTE: Depending on the documents, its job may be too big for the available memory. In this case, an
error occurs.
NOTE: If a document name is not assigned to your print job in the print driver, the job's name will be
identified using the PC's time and date of submission to distinguish it from other jobs you have stored
under your name.
Printing and Deleting Held Jobs
Once held jobs are stored in print memory, you can use the printer operator panel to specify what you want
to do with one or more of the jobs. You can select either
Secure Print
and
Proof Print
from " Stored
Print ". Then, you select your user name from a list. If you select
Secure Print
, you must type the password
you specified in the driver when you sent the job. See " Secure Print " for more information.
From either the Secure Print or Proof Print menu items, you have three choices:
Del after Print
Print and Save
Delete