This function turns on the image enhancement function. In some cases, this option will be ignored.
-Nc=
copies
Specifies the number of output copies (the value of copies must be a positive integer).
-Cl
Specifies that printing be collated. If the copies option is not specified, this option will be ignored.
-Hd=
position
:
format
Specifies the position to be output the user information as the header or footer.
position
specifies output position. But this option is available only for converting text files.
ul
Output on the upper left corner of the paper.
ur
Output on the upper right corner of the paper.
dl
Output on the lower left corner of the paper.
dr
Output on the lower right corner of the paper.
format
specifies the contents and the order to output. This option is omissible.
If this option is omitted,
uh
is specified as the default value.
u
User name
h
Host name
t
Date and time
If the output contents are specified as
tuh
, it is output as follows.
Date and Time User:
username
Host:
hostname
.
Specify these options as follows.
In the case that convert text file, output the host name following the user name on the upper right
corner of the paper, output all pages.
(User name, Host name, all page output are default)
-Hd=
ur
-Hd=
ur
:
uh
Содержание 3110 Color Laser
